The FP BLUE Turbocharger will support up to 475 HP for those wanting to make more power in the Subaru STI.

Forced Performance FP BLUE Turbocharger

---

Specs:

• Compressor wheel: 73HTZ
• Flow rating: 57lb per minute
• CW measurements: 52.6mm inducer / 73mm exducer
• TW measurements: 60.8mm inducer / 54mm exducer
• Compressor housing: Factory size stock appearing cover
• Turbine housing: 8cm
• CHRA: FP journal bearing
• Oil line: Included
• Supports up to 475whp

NOTE:

• Includes Type 1 instructions to be used if the oil feed location off the back of the head only feeds the turbo. This was formerly known as the non-AVCS line

Forced Performance FP BLUE Turbocharger

The FP Blue Turbocharger can support up to 475 horsepower with the right supporting modifications, and a proper tune. This is an advanced turbocharger featuring the 73mm HTZ compressor section with the 58mm stock-appearing compressor cover that is paired with an 8cm2 turbine section.

This turbocharger will come pre-assembled with oil lines and will include new gaskets which will make this turbocharger ready to install right out of the box, and into your race car, rally car, or high-powered street car.