Tein
Tein Flex Z Coilovers
2013+ FR-S / BRZ / 86
TEIN Flex Z Coilovers are the latest in TEIN's generation of high end coilovers. The difference with Flex Z is that you are getting a coilover that would normally cost almost double the price. The new manufacturing systems that TEIN has put in place with this line of coilovers has allowed for them to produce these coilovers at a lower price and pass that savings on to you. Quality and performance remains top of it's class and TEIN builds these Flex Z coilovers with the highest quality standards in Yokohama, Japan making these a true Japanese JDM coilover system.
Details
Tein Flex Z Coilovers
TEIN Flex Z Coilovers are the latest in TEIN's generation of high end coilovers. The difference with Flex Z is that you are getting a coilover that would normally cost almost double the price. The new manufacturing systems that TEIN has put in place with this line of coilovers has allowed for them to produce these coilovers at a lower price and pass that savings on to you. Quality and performance remains top of it's class and TEIN builds these Flex Z coilovers with the highest quality standards in Yokohama, Japan making these a true Japanese JDM coilover system.
Specs and Features
- Front Height adjustable from -0.0" to -2.3" (highest to lowest)
- Rear Height adjustable from -0.0" rear to -3.4" (highest to lowest)
- Spring Rates are 336 lb front and 336 lb rear
- Made in Yokohama, Japan
- Twin-Tube for Comfortable Street Ride
- Full-Length System for Height Adjustment with minimal change in ride quality even at lowest setting EDFC Compatiable
- Includes Upper Mounts for Easy Installation (some vehicles use OE mounts)
- Inclues Dust Boots (some vehicles use OE dust boots)
- TEIN Quality for durability, reliability and rust proofing
- No-Sag Springs
TEIN Flex Z has an awesome twin tube internal system that gives you one of the best street rides we've seen. In addition, the full length height adjustment system enables you to lower the car to the max allowable level and still maintain the same shock travel and ride quality.
TEIN Flex Z is 16 way dampening adjustable (compression and rebound together) so you can made the ride stiffer or softer depending on what you are looking to achieve. For example, you can set the dampening to a low setting for when you are daily driving the car and set it up to a stiffer/firmer setting for track or competition use.
These coilovers include upper mounts for each installation. Each kit comes with either reinforced rubber upper mount or a pillowball upper mount. Pillow ball upper mounts are for strut suspensions and include front camber adjustment.
TEIN takes pride in their products and each one is built to be the best quality possible. TEIN coats each Flex Z with "ZT Coating" that prevents rust and has multiple layers to ensure the best finish.
Featured In FT86SpeedFactory's New Products March Video
People who viewed this item also viewed
4 customer reviews
-
Great coils
By Brandon February 22, 2023Awesome set of coils to start with!
-
Awesome basic coilovers
By cam December 28, 2022Awesome budget coil overs that get the job done. if you want to slam them they can get you very low on 18's but not all the way on 17's. preformed awesome and felt similar to stock; with all the better road feel you could ask for... install was a breeze, about 15 mins a side....worth the price on a sale :)
-
Good as it gets for price
By Dakota October 7, 2022Installation was not terrible just took a while for the front, having a second set of hands makes this a million times easier. Out of the box they offer roughly about an inch in the front and 3/4 an inch in the back. I’m currently dialing in my ride height before winter and snow rolls around, but I’ve found on stock wheel setup 25mm in front and factory settings in back gives almost tire to fender while still maintaining good ground clearance
-
Be careful
By Alex January 16, 2021Car i bought had these installed as well as sway bars, the endlink went out and there are not replacements from tein. So i get the whiteline and the top fits but the bottom diameter is different and the new link doesnt fit and now have no clue hot to get a replacement that fits
