SubiSpeed / GCS F1 Style Rear Fog

SubiSpeed / GCS F1 Style Rear Fog

There are many ways to wire the rear fog light into the new 2015 WRX / STI. However, if you want it only to come on with the fog lights you'll find yourself using a pretty long run of wire.

We've made a quick connect kit which will split the wires to the passenger side fog light. Just run the wire under the driver's side fender liner, into the vehicle, and along the door sills back to the trunk of the vehicle. If you've purchased our modified rear fog light harness for the JDM rear fog light, it'll plug right in. Just place the supplied socket over the wires and snap everything together. For the SubiSpeed F1 Style Rear Fog, just crimp the ends of the wires with the supplied hardware. This will make installation quick and painless.

NOTE: Main picture is of the JDM fog light version.

Includes

• Extension with proper terminals
• Fog Light Splitter

The plug for the female ends is not pre-attached so that the wires can easily be run through grommets in the firewall area.

NOTE: The vehicle must be equipped with front fog lights to use this. Rear fog light assembly sold separately.