OLM

OLM Low / High Beam Projector Fog Lights

$115.00

SKU: OLM-PFOG-BIBEAMWe price match!

Out of Stock

For owners who demand the most light possible, OLM has produced a low / high beam projector light which is a direct replacement for the factory fog lights. They offer a sharp cutoff to prevent light from blinding oncoming motorists. This one housing gives you another set of high beams as well. There is a mechanical flap inside the projector which moves within an instant of being activated*.
You will earn Reward Points with this Purchase.

Details

For owners who demand the most light possible, OLM has produced a bixenon (high / low beam) projector fog light kit which is a direct replacement for the factory fog lights.

NOTE:Standard fog light projector is low beam only. For Bixenon version, please choose the upgrade in the options.


VAST IMPROVEMENT

The factory 2015 Subaru WRX / WRX STI fog lights are plastic housings with 19 watt bulbs. Many reviewers will note that they don't put a whole lot of light on the road. These projector lights are a world of difference.

They offer a sharp cutoff to prevent light from blinding oncoming motorists. This one housing gives you another set of high beams as well. There is a mechanical flap inside the projector which moves within an instant of being activated*.

Check out the comparison.


BETTER IN ALL SITUATIONS

Whether you're driving on a clear night or headed through a foggy forest, you'll enjoy the extra light. Mounted much lower than the low beams, the light can cut through the fog and still put light on the road.

HID kits are available in various colors to match your headlights or choose 3000K for extra visibility in fog or foul weather.


BEAM

Wide enough to be called a fog light but projects light far down the road like a driving light. So what do we call it? Call it what you want, however we just call it nice.

The additional light gives you the confidence to drive without worries at night.


INSTALLATION

Installation is simple! Just turn your wheels, undo some fasteners, and the factory housings can be swapped without lifting the vehicle or removing the bumper. Optionally, you can splice in the lines for the high beam signal wires.

If you do not wire up the high beam signal wire, these can be used for low beam operation only.


Benefits

  • Higher light output (35w HID vs 19w halogen)
  • Current draw does not exceed factory wiring limits
  • Improved visibility
  • Plug and Play for vehicles equipped from the factory with fog lights
  • Easy to install

*Please check local laws concerning running a fog light while your high beams are engaged. The factory fog lights turn off when the high beams are turned on. In order to supply power to these lamps when the high beams are engaged an additional relay and diodes will need to be used (not included).

BRZ setup includes 5202 converter harness.

Optional Items

All in One HID Upgrade

OLM's All in One HID kit is a nice upgrade from typical HID kits. It's compact design has a small overall footprint making installations clean and simple. You don't have to mount a ballast or ignitor as it is mounted to the back of the bulb.

For more information, please click here.

HID Relay Harness

For customers who are already running a number of aftermarket products, you might want to consider installing our optional relay harness. This provides HIDs power directly from the battery. It is triggered by the factory fog light wiring, but does not draw current from it.

Fog With High Beam Harness

This harness solves a huge problem for night time drivers. When the high beams are turned on, the fog lights automatically turn off. This is designed to meet certain requirements in various countries. Unfortunately this leaves objects close to the vehicle unlit. You will notice the difference especially when running an upgraded bulb or upgraded fog light housing.

Please see links to related products below for more information.

Warranty

1 year manufacturer's warranty

Customer Submitted Video

People who viewed this item also viewed

1 customer review

Average rating
(based on 1 review)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Not worth it

    By Jesse August 1, 2022

    They don’t come with the proper harness and don’t work that well even once you solder the wires in. Included no instructions.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

QUESTIONS & ANSWERS

No questions have been asked about this product.

Upload images for this product