We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Tail as Turn (Signal) + Backup Module
2015-2020 Subaru WRX & STI
This product is neat. With the lack of aftermarket tail lamps on the market for WRXs and STIs in general, you're left with only a few modifications you're able to do to your tail lights.
Get rid of the standard turn signal and transform the brake light into one. The high mounted brake light will still let people know that you're stopped and intending to make a turn. It's safe, and it looks good. Another added feature is that you can turn the old turn signal bulb into an additional reverse lights if you choose to do so. In this setup, you will have to use LED bulbs vs halogen due to the added current draw. Paired with our bulbs, you'll have 4 intense bulbs letting everyone know that you're about to back up.
NOTE: The revised Tail as Turn module now includes a hyperblink fix. No additional hyperblink module purchase is required unless you plan to use LEDs in the front turn signals as well.
This product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.
NOTE: For all wiring configurations, please see the "additional" tab on this page. This video was published before information regarding tapping the harness for changing the turns into reverse lights was published.
Reverse Light Upgrade - Light "A" is the original reverse light bulb. Light "B" is the original turn signal bulb. While different in design due to the sockets, both OLM bulbs offer a brilliant, intense, white light.
Designed for USDM vehicles only. Confirmed incompatible with AUDM vehicles.
The factory reverse light is a standard halogen bulb which emits a very orange light.
Replace this with a long lasting, low current, white, LED bulb. Drastically increases light output!
Sold as a PAIR.Output
With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.
Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.How do I prevent the bulb from falling out?
When you seat the bulb, use a good amount of force to firmly seat it in the socket (~5 lbs). Do not strike the bulb on the housing when inserting it. This is usually the cause for loose bulbs.
As per requested, we've made a replacement bulb available for the 2015 WRX / STI JDM rear fog light. This ultra bright, low current draw bulb uses long lasting LED chips to produce a brilliant light. Inside the casing of the JDM rear fog light, you'll get a crisp red light.
This is a great upgrade for the standard halogen bulb that comes with the kit.
|Additional Warranty Information||None|
Tail as Turn (Signal) + Backup Module / LTURN-WRX-KIT-PARENT Fits
12 customer reviews
Great Mod for looks.
This is a great mod if you want your car to look advanced. Subaru should've done this from the start. It was a quick 30 min install. I would totally recommend it.
Overall a great mod!
I installed this kit on my 2017 WRX. Installation is pretty darn simple. The T-tap connectors can be a bit of a pain, and you can end up cutting a wire if you aren’t careful. So pay attention to that. Otherwise, installation was super easy. One thing I don’t like is the added resistors in the wire harness. Where the wire harness goes, there isn’t a great place for those really large resistors to live, so it makes for a messy install. The resistors are there so you don’t get a hyperblink condition when installing this kit. It would be better to remove those resistors from the kit and simply include a hyperblink module instead, in my opinion. In the end, if you are going to convert the front to LED, you will need it anyway. The only other issue I had was with the LED replacement bulbs for the old back up lights. The replacement bulbs do not fit the socket very well, so they feel pretty loose. I actually had one rattle out of the socket while driving. (I pushed it in really good and hard the second time and so far so good.). Despite the issues, overall I love this mod. So much better looking than factory.
I just received it today, installed it and I’m blown away at how much of a difference this makes. I’m definitely happy i purchased this and i can’t wait to get more parts......
Must have mod!!
If you are looking to have a pretty sweet taillight mod, without purchasing new taillights, than this is for you! This is the way Subaru should have made it in the first place. The extra reverse lighting helps out a lot. Especially if you have the smoked taillight vinyl. Very sleek.
Wow they are bright
Get the full kit and all LEDs.... I never say I cant see when I put it in reverse.
Highly recommend this product!
Install was easy, they look fantastic, and I got the reverse lights upgrade as well as converting my OEM rear turn signals in additional reverse lights. They look amazing, couldn't be happier!
Great with tinted windows.
The hyberflash relay is not needed. The product comes with one installed and you will NOT get a hyberblink. I do love this mod. I have a dark tinted rear window and had a hell of a time backing up in the dark until I put in the tail as turn mod. Now with the extra back up light I can see fine. This mod is a MUST if you have tinted windows!
Love the look, wish reverse didn't need tap
I love the look even though I personally don't see it often. This plus the fog/brake light really makes the rear lighting pop. Install was really easy, but I wish they made one with a built-in additional reverse light instead of having to tap into itself. It just seems silly if that's ultimately the configuration you want from the beginning. Not that big a deal though.
These totally changes the look of your tail lights, especially when you Integrate the reverse and turn signals together! no need for a turn signal resistor because it comes with it built in! I really like this mod, and for the price you cant beat it!
Why was this not stock!!
Such a great thing to make your wrx/sti. A little different from stock. Install was as simple as changing a light bulb. This was definitely worth a purchase.
Great First Mod
I just did this as one of the first mods to my 17 WRX. So simple to install, and the result is a must have. I would highly recommend to anyone who wants a 100% better looking turn signal.
Great mod to improve the rear of your car!
Just did this mod to my 2017 STI and the overall quality of the module was great. Installed in around 30 minutes even with the LED bulbs. Very satisfied with the module and bulb upgrade. Would recommend to a friend.