FT-86 SpeedFactory

FT-86 SpeedFactory V1 Cat Back Exhaust (Resonated)

2013+ BRZ

$980.00
Ships for free in the 48 states

SKU: FT86SFEXHV1-RES

Out of Stock

We set out to make one of the highest quality systems available that was simple and had a great sound. We have a single piece mid pipe section that is mandrel bent as needed and one of the straightest available. A V-Band clamp was used to attach the axle back portion for ease of install, and future V2 (right side single exit) and V3 (no muffler single exit) upgrade options. You hear the exhaust when you want to, by letting the RPM's wrap out with your foot firmly on the floor, and don't hear it when cruising at 3000 RPM down the highway. It is also not overly loud when shifting normally on your morning commute to work. To keep the ruckus down during normal driving we had to use a heavier muffler. Testing showed us that the lighter mufflers increased noise in the RPM ranges for daily commutes and is not something we wanted in our V1 system. We will have lighter exhausts for our V2 and V3 due out later this year. The number one goal for the V1 is sound and daily drive-ability, and I firmly believe that has been accomplished here. All of our systems are built to order. This will add 3-4 business days ( Monday - Friday ) for welding and coating if applicable.

Details

This is the best exhuast system out there for the Subaru BRZ period!

We set out to make one of the highest quality systems available that was simple and had a great sound. We have a single piece mid pipe section that is mandrel bent as needed and one of the straightest available. A V-Band clamp was used to attach the axle back portion for ease of install, and future V2 (right side single exit) and V3 (no muffler single exit) upgrade options.

You hear the exhaust when you want to, by letting the RPM's wrap out with your foot firmly on the floor, and don't hear it when cruising at 3000 RPM down the highway. It is also not overly loud when shifting normally on your morning commute to work.

To keep the ruckus down during normal driving we had to use a heavier muffler. Testing showed us that the lighter mufflers increased noise in the RPM ranges for daily commutes and is not something we wanted in our V1 system. We will have lighter exhausts for our V2 and V3 due out later this year. The number one goal for the V1 is sound and daily drive-ability, and I firmly believe that has been accomplished here.

Features

  • 2.5" T304 Stainless Pipe
  • T304 Stainless Muffler
  • Minimal bends, as straight as possible
  • 4" Stainless Angle Cut tips
  • Made in the U.S.A (Iowa to be exact.)
  • V-Band Clamp for rear section
  • Up to a 7 Wheel HP Gain in the RPM range
  • Up to a 3 FT LB in Torque Gain in the RPM range
  • Lighter than stock exhaust system
  • Fits both manual and automatic BRZ cars
  • Doesn't annoy the Girlfriend / Wife

2 YEAR WARRANTY FOR ORIGINAL OWNER

REV with Stock Front Pipe

Dyno with Stock Front Pipe

In Car with Stock Front Pipe

Drive By with Stock Front Pipe

Stationary Rev with Invidia Catless Front Pipe

Drive By with Invidia Catless Front Pipe

In Car with Invidia Catless Front Pipe

Customer Video - Invidia Catless Front Pipe and our exhaust

Customer Video - Stock except for the V1:

0 customer reviews

Average rating
(based on 0 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product


Feel free to share pictures of your vehicle with this product!