- WRX
FT-86 SpeedFactory
FT-86 SpeedFactory Catted Unequal Length Header
2013-2022 Scion FR-S / Subaru BRZ / Toyota GR86
FT-86 SpeedFactory's Catted UEL header is ready to get rid of that notorious torque dip that plagues the Scion FR-S and Subaru BRZ. Made in the USA from 304 Stainless steel and tig welded at every corner.
The exhaust runners are 1.75" in OD and flow into a 4 to 1 merge collector that exits into a 2.5" OD catalytic converter which mates to the factory over pipe or any aftermarket over pipe that is in the factory location.
Please contact us for current delivery times if the item does not show "IN STOCK".
Note: These have been tested to fit the new 2022 Subaru BRZ and Toyota GR86Details
FT-86 SpeedFactory Catted Unequal Length Header
FT-86 SpeedFactory's Catted UEL header is ready to get rid of that notorious torque dip that plagues the Scion FR-S and Subaru BRZ. Made in the USA from 304 Stainless steel and tig welded at every corner.
The exhaust runners are 1.75" in OD and flow into a 4 to 1 merge collector that exits into a 2.5" OD catalytic converter which mates to the factory over pipe or any aftermarket over pipe that is in the factory location.
The stock under tray will bolt right back up after installation, making sure you can still protect the cars underbelly, as well.
Quality Improvement
Our catted UEL header is a simple bolt on install that gains 18ft lb. of torque and 12HP in the infamous "dip". Peak power is up 14HP and 5ft lbs of torque with no ECU tuning. Unlock even more with a tune. No CEL, as well, for those who wish to not stare at a light on the dash. No CEL is on a stock car with no other mods. If you have other parts you still need a tune.
Weight
Stock Header = 20.8lbs
FT86SF UEL = 13.0lbsEach header is built to order. Due to the hand made nature of this header lead times can vary depending on current work load. Current lead time is 1-2 weeks if status shows "ships from factory". We do our best to stick as close as possible to these dates.
Please contact us for current delivery times if the item does not show "IN STOCK".
Includes
- OEM Subaru Metal 2.5" Gasket for Overpipe section
- Two Bolts and nuts.
- Lifetime Warranty (original owner only) against cracks or other defects in metal and weld quality. The CAT is void of any warranty claims as this unit can be damaged from HIGH EGT's on bad tunes.
Everyday Driver Video
The guys at Everyday driver are up at altitude for this video (~4500 ft). They run a baseline dyno on their FR-S and then install an FT-86 SpeedFactory catted header and V1 catback exhaust. Includes before and after dyno / drive commentary.
0 customer reviews
-
Great sound mediocre power
By Brian November 5, 2020Installation was pretty easy. The hardest part was taking off the stock manifold. (which is still pretty easy) I will say that I have not noticed a difference in power or torque (without a tune) so If that is your main goal, $900 is a lot for minimal gain. If you’re looking for sound, and you like the traditional “Subi rumble” This will leave you smiling every time you drive.
-
Perfect in every way!
By Jake February 9, 2019I installed this by myself with minimal trouble, the fitment is incredible compared to the OFT headers that i used to have. Not too loud with just a muffler delete, gives you the right amount of rumble.
QUESTIONS & ANSWERS
No questions have been asked about this product.Upload images for this product
© 2014 Subispeed. Powered by JB Autosports.
-
