OLM

OLM Limited Edition VA Style Paint Matched Hood with Carbon Vents

2015-2021 Subaru WRX & STI

$1,204.35

SKU: A.70084.1-PARENT

 

If you really want your hyper-aggressive WRX or STI build to make a statement on the street, at the track, or at the car meet, then the OLM VA Style Paint Matched Hood with Carbon Vents for the 2015-2020 WRX and STIs is a heck of a way to do it. OLM’s WRX and STI paint matched hood takes your Subie’s looks to an entirely new level by combining a massive front scoop design, functional heat extraction vents on either side of the scoop, and construction that produces that gorgeous and eye-catching look and design. OLM’s Paint Matched VA Style hood installs right onto your Subie’s factory hood hinges and comes with a factory-style hood latch that keeps custom fitting to a bare minimum.

This is a SubiSpeed Limited Edition product. We do not expect to receive additional stock once sold out!

NOTE: Due to the size of this product, we cannot ship it to anywhere outside the lower 48 states. weeks for paint. YOU MUST ANSWER YOUR PHONE FOR DELIVERY SCHEDULE TO BE MADE. Truck drivers need to make sure you are home before dropping off.

NOTE: Please read the entire product listing and take particular note to the bottom in regards to receiving and handling your product.

Reset Configuration
Dark Gray Metallic / Asphalt (61K)
Galaxy Blue Pearl (E8H)

Details

OLM VA Style Paint Matched Hood with Carbon Vents


Highlights

  • Paint Matched
  • Super easy install
  • Comes with everything you need to install
  • Completely changes the look of your 2015-2020 WRX or STI
  • Aggressively-styled hood made with carbon fiber vents
  • Bolts on to factory hood hinges
  • Plastic OE style vent mesh vs typical metal chicken wire
  • NOTE: Comes with included rain guards underneath hood

Give Your Subie's Front End a Whole New Aggressive Custom Look

If you really want your hyper-aggressive WRX or STI build to make a statement on the street, at the track, or at the car meet, then the OLM VA Style Paint Matched Hood with Carbon Vents for the 2015-2020 WRX and STIs is a heck of a way to do it. OLM’s WRX and STI paint matched hood takes your Subie’s looks to an entirely new level by combining a massive front scoop design, functional heat extraction vents on either side of the scoop, and construction that produces that gorgeous and eye-catching look and design. OLM’s Paint Matched VA Style hood installs right onto your Subie’s factory hood hinges and comes with a factory-style hood latch that keeps custom fitting to a bare minimum.

Hoods can really fill in the look of the exterior of your 2015-2020 Subaru WRX or STI while improving the overall appearance. These are especially beneficial for those of you with other exterior enhancements such as side skirts, front lips, or rear wings. It really brings the whole look together instantly.

OE Like Installation

Make the front end of either your 2015-2021 Subaru WRX or STI better looking and more aggressive with the OLM VA Style Paint Matched Hood with Carbon Vents! This paint matched hood is a huge upgrade for your WRX or STI. The bang for the buck is high as this piece can really transform your front end. Mounts easily with your OEM hood latch.

Shipping and Installation Notes

Please read the following section carefully. Due to the size of this item and the fact that it needs to be transported via truck freight, special care and concern must be taken.

Average gap between fender and hood will be 6-8mm. Before fully tightening the 4 bolts which secure the hood to the vehicle, make sure the gaps are even on both sides. How far the hood sits can be adjusted using the factory rubber grommets located towards the front. Adjustment of the latch mechanism may be required to obtain desired fit.

Do not use hood struts that are higher than stock pressure. This can cause damage to the hood. Improper mounting can cause an excessive lifting force on the hood. Check the gap on the lead edge and utilize aftermarket hood safety pins when needed.

Comes with drip trays for side vents. ABS style vents must be fitted and can be trimmed with pliers. Like most manufacturers small imperfections may be present. Due to transit, once completely fitted we do recommend light polishing. The hood in our photos has not been polished or cleaned so please use those photos as a benchmark for what you will receive.

Designed for your to transfer all the OEM hood scoop plastic trim over.

0 customer reviews

Average rating
(based on 0 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product