Subaru / OLM OE+ JDM Style Sequential Turn + DRL Bezel Kit (No Fog Hole)

2018-2021 Subaru WRX & STI

Ships for free in the 48 states

JDM styling is now available in the US without the high price tag. Utilizes genuine Subaru JDM bezels.

These feature a DRL bar like the JDM version but also have a sequential turn feature.

NOTE: This model was made for vehicles without fog lights (ie STI / WRX Base).

  • Details
You will earn Reward Points with this Purchase.


Subaru / OLM OE+ JDM Style Sequential Turn + DRL Bezel Kit

Featured in Subispeed's New Products March

Subaru didn't bring these awesome fog light bezels to the states. They can be imported but at a cost. A similar look can be replicated using these Subaru OEM bezels and OLM LED Modules. They feature metallic gloss black bezels and an ultra bright DRL strip.

This version also adds a little more functionality over the JDM bezel. They have full sequential turn signals built in. You can change the function from sequential to standard blink with the flick of a switch on each side.

Utilizing genuine Subaru JDM Bezels and OLM DRL / Sequential turn lamps we're able to offer a better than OEM setup for the US market.

NOTE: This model was made for vehicles without fog lights (ie STI / WRX Base).

Subispeed's How To Install Video

This video for the original DRL bezels is a great start for your installation. The only added item for these are the pass through turn signal plugs which were designed for vehicles with the turn signals mounted in the lower fog light area. If you vehicle is equipped with headlights which house your original turn signals, you will need to tap those wires into the bezels.

NOTE: These bezels DO NOT have separate LED driver boxes. The electronics are all integrated into the light housing.


  • Red - Positive
  • White - DRL Override (positive, connect to power wire IF you want it to turn off under certain conditions)
  • Black - Negative / Ground
  • Turn signal pass through harness

You can wire these up a few different ways. If you own a 15-17 WRX / STI with bumper conversion or 18+ WRX Premium / Base owner, we recommend the SubiSpeed Quick Connect wire that goes in your low beam and high beam fuse spots. 18+ WRX Limited and STI owners we recommend modifying an add a fuse plug. More details on the "additional" tab.

NOTE: While most of the connectors are sealed, DO NOT allow connectors or the driver boxes to rest in areas where water pools up (ie the plastic tray at the bottom of the car). Encouraging them to be submerged in water for periods of time is not recommended for long life. Mount them in an area that will minimize exposure to water and vibration.

Optional Items

DRL Turn Signal Quick Connect Harness

This product comes with a single add a fuse which can be placed in the high beam fuse position in the fuse box. However, it will go off when the headlights are turned on. There is also another location to get accessory power, but it will always be on. If you want the DRL on this bezel to act like a real DRL (ie turns off when the parking brake is up), choose this harness. It will use both the low and high fuse positions in the fuse box.

OLM Turn Signal Quick Connect Harness for Factory LED Headlights (2018+)

The wiring for 18+ LED headlight equipped vehicles is different from their halogen counterparts and even the 15-17 models equipped with LED headlights. The turn signals were moved up into the headlight casing. This poses a small issue for the standard wiring. This turn signal quick connect harness comes with a factory style plug on one end with insulated male terminals on the other. Just crimp the female T-taps over there two wires going to the factory turn signal bulb in you stock housing and connect these wires to it.

Also supplied is a factory style block off plug to prevent anything from getting inside the rest of the wire. Comes with a pair of harnesses, plugs, and 4 female t-taps. These are all the items required for one vehicle.

OLM LE Dry Carbon Fiber Bezel Covers

New for 2020 product from OLM for your 2018+ WRX / STI. Cover up the center portion of your fog light bezels with some carbon fiber. They are not full replacements but instead lay over these bezels.

Designed in Japan and imported to the US. Made from dry carbon. This carbon is ultra lightweight and the craftsmanship is top quality. No ultra thick fiberglass or large amounts of resin are used when forming dry carbon products. Precision fit.

Mounting hardware is included. Requires 4 small holes be drilled out.

NOTE: This ONLY fits authentic JDM DRL fog light bezels. Fog light bezels NOT included.

1 customer review

Average rating
(based on 1 review)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Good fit, look good, very poor quality finish

    By Josh May 8, 2021

    I've had 2 sets of these over the course of a year and a bit, both times the finishing has bubbled and peeled right off. The fit and style are really good, but I suggest if you pick up a set that you either wrap them or repaint them yourselves because they are very cheaply finished. Landed repainting them myself and they look better than out of the box.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product