Forced Performance FP BLACK Turbocharger 84mm 8cm IWG w/ Oil Feed Line

Forced Performance FP BLACK Turbocharger 84mm 8cm IWG w/ Oil Feed Line

Highlights

• Compressor Wheel: 82HTZ
• Flow Rating: 71LB per minute
• CW Measurements: 59.1MM Inducer / 82MM Exducer
• TW Measurements: 67.3MM Inducer / 58.8MM Exducer
• Compressor Housing: 84MM FAP Cover with Black Coating
• Turbine Housing: FP 8CM or 10CM Subaru Turbine Housing
• CHRA: FP Journal Bearing
• Oil Line: Included
• Gasket Set: Included

More Power for Your Subi

Forced Performance has been progressively designing and engineering premium aftermarket turbochargers for the sport compact market for decades. Today, Forced Performance continues to expand their catalog by producing quality aftermarket turbochargers and turbocharger accessories for many makes and models.

This particular Turbocharger is the FP Black which features the 82 HTZ compressor section with a compressor wheel measurement of 59.1mm inducer and an 82mm exducer. The turbine wheel measurement will have a 67.3mm inducer with a 58.8mm exducer. It will come with the 84mm Flow Advancement Port compressor cover that will be coupled with the Forced Performance 8cm turbine housing. Additionally, it will have the CHRA FP journal bearing and has a flow rating of 71LB per minute. This is a great upgraded turbo for your racecar, rally car, overlander and daily driver!

Note that this particular turbocharger will come with the Type 1 oil line application. Due to part number changes year to year and make to make you need to determine which type of oil line you will need. Now the Type 1 Oil Line is to be used if at the oil feed location off the back of the head only feeds the turbo. This was formally known as the non-AVCS line.

Also, because this turbocharger has the 84mm cover, it will require the TGV Delete to be able to fit in the stock location.

The Forced Performance Black Turbocharger will come with the oil line, hardware which includes banjo bolts, as well as a new downpipe and up-pipe gasket to make this turbocharger ready for the installation.

For a perfect install, FP recommends using their 84mm Inlet. The 84mm compressor housing is slightly larger than 3" and other brands inlet hoses are not compatible with this turbo.

The Forced Performance Black turbocharger for the EJ Subaru WRX and STi features the 82mm HTZ compressor section with the FP 84MM Flow Advancement Port compressor cover coupled to the 8cm2 or 10cm2 turbine section. This combo nearly maxes out the stock location possibilities on this platform. The FP Black flows 71LB a minute and is capable of producing upwards of 575WHP. Internal gate Subaru turbos are available with either the stock canister style 15 PSI actuator, or you can upgrade to an 18 PSI TiAL MVI actuator. Oil line and gaskets are included.