SubiSpeed Facelift JDM Style Sequential Turn + DRL Bezel

2018-2021 Subaru WRX / STI

Ships for free in the 48 states
Add a sleek JDM style to the front of your aggressive 2018-2020 Subaru WRX or STI with the Subispeed Facelift JDM Style Sequential Turn + DRL Bezels!
You will earn Reward Points with this Purchase.


SubiSpeed Facelift JDM Style Sequential Turn + DRL Bezel

  • A Sleek JDM look for your Subie’s front end
  • Simple and easy installation
  • High Gloss Metallic Black Paint Finish
  • DRL Bar like the JDM version, but with a Sequential Turn Feature
  • Change between Sequential or Standard Blink Turn Signal
  • Ultra bright DRL Strip
  • Does NOT include fog lights

Additional install notes regarding optional harnesses available in the ADDITIONAL tab above.

Subispeed DRL Fog Light Bezel Install

A Subtle Change Can Make the Biggest Difference

Here's a low cost, simple modification that will attract a little more attention towards your vehicle. Subaru didn't bring these awesome fog light bezels to the states. They can be imported but at a cost. A similar look can be replicated using these SubiSpeed bezels however. They feature metallic gloss black bezels and an ultra-bright DRL strip.

This version also adds a little more functionality over the JDM bezel. They have full sequential turn signals built in. You can change the function from sequential to standard blink with the flick of a switch on each side.

See the Road Ahead of You More Clearly

While the 2018-2020 Subaru STI looks sleek and aggressive straight from the factory, adding a touch of LED lighting to your front end can improve style and functionality in one easy package. These are a much-needed upgrade from the Stock OEM fog light bezels. Add some fog lights to these bezels and you’ll see everything in the road ahead of you.


  • 2018-2020 Subaru WRX
  • 2018-2020 Subaru STI

Fog Light Bezel Install

6 customer reviews

Average rating
(based on 6 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Thumb Up

    By Horizon March 9, 2021

    This set of SEQUENTIAL TURN + DRL BEZEL is worth every penny. Just don't forget to get yourself an OLM Hyperlink module because your premium or base WRX gonna think that your turn signal bulbs are burned and it is going to blink very fast.

  2. $180 WENT A LONG WAY

    By Jerry November 14, 2020

    IF YOU RUN THE DIODE DYNAMIC C-LIGHT THESE MATCH MUCH BETTER THAN THE NON-SEQUENTIAL VERSIONS. I hate sequential lights so I keep them switched to standard solid blinks. Best way to get rid of the hideous square OEM turn signal, and are bright enough in tandem with the DD C-lights. Super happy with the new bezels. Put them in the car over 6 months ago, never once had an issue with the lighting aspect of the bezels. Fitment is great, I just had to pop them in a few times before I got it perfect. Being that these are so low to the ground on the front end they are prone to rock chips like anything else. I've heard of people clear coating them for added protection. I didn't take that route initially and I found that the paint was bubbling on the driver side bezel after 6 months. I hit up subispeed and Brian replied within the day asking for a photo. Sent that over and no questions asked, they shipped a replacement out and that got to me in CA within two days. People like to blast this company on reddit for "poor customer service" but my experience has been far from that. They always email back with installation tips on the more challenging installs and handle the RMA process very well. Only put the 4/5 because of the paint bubbling but i'm more than stoked on the customer service and product as a whole. 10/10 would buy again.

  3. great fit but easily chipped

    By Alexander August 21, 2020

    Fog light bezels fit and work perfect. Love the sequentials on them havent had a problem yet and ive had them on the car for 2 months now. That being said the paint quality for the bezel does not hold up at all 2 months in and both bezel have paint flaked off in multiple areas of the bezel. If i were to buy again would definitely send for an extra clear or sealant on top before install.

  4. Impressed/Recommendations

    By Esteban (STI_ESTI__) August 13, 2020

    Ordered these as I did the 18+ front end conversion for my 17 STI. Install is pretty straight forward & was done within 30 minutes at least & very impressed with the quality. I would say that the quick harness they recommend is not needed whatsoever for the 15-17 WRX/STI & 18 WRX base models. However, what is not stated and luckily I found out through YouTube, 15-17 WRX/STI & 18 WRX base models will require a LED Flasher Assy Relay (81980-50030 066500-4650), if not, you will have hyperblink. Subispeed has them but I ordered mine from amazon and works perfectly fine. Check out my ig next to my name to view them.

  5. Easy install but subpar paint quality

    By Ricky July 9, 2020

    Install was easy and straight forwards. Fitment wasn’t OE quality, but barely noticeably unless you look up close. The paint started chipping in less than 3 months after install

  6. Greatly exceeded my expectations!

    By Andre December 3, 2018

    I can't believe the quality of these bezels when I first got them. Fitment was exactly on point, so installation was a breeze in that respect and literally took seconds to swap out. I gave it a 4 out of 5 stars only because this product is not 100% plug and play for those who have a 2018+ WRX/STI. I never splice into factory wiring/harnesses so if you're like me, purchase the additional add-a-fuse as well as the harness. This will get you everything you need right to splicing into the turn signal socket. I purchased some socket adapters and made my own connector so I wouldn't cut factory wires. Hit me up on IG if you want the info on that (ajp_wrx). I would HIGHLY recommend these for anyone wanting to add more lighting and functionality to your front end. It really steps up the look of the car.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product