Recently added item(s)
- WRX
- STI
- BRZ
- FORESTER
OH NO!
We couldn't find any results
Search Tips:
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
Search term:
SearchxPrice:Actual Price:Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.Subaru Performance OEM Paint Matched 2018 WRX STI Front Bumper0 / Review(s)CategoriesStockBrandRating- Home /
- Subaru Performance OEM Paint Matched 2018 WRX STI Front Bumper
Subaru
Subaru Performance OEM Paint Matched 2018 WRX STI Front Bumper
2015-2020 Subaru WRX & STI
$ 1669.77$1,669.77$0.00Bundle Savings:Ships for free in the 48 states
Add a facelift to your 2015-2020 WRX or STI with a Subaru OEM Paint Matched 2018 front bumper from Subispeed!
The center piece is painted gloss black vs the standard 2018-2021 bumper for a performance look.
NOTE: Due to the size of this product, we cannot ship it to anywhere outside the lower 48 states. Also note that if product is in "ships from factory" status to allow 3-4 weeks for paint. We are always having more painted but demand may cause delays in this process. YOU MUST ANSWER YOUR PHONE FOR DELIVERY SCHEDULE TO BE MADE. Truck drivers need to make sure you are home before dropping off. :)
Details
Subaru OEM 2018 WRX STI Front Bumper
Highlights:- Paint Matched Bumper and Tow Hook Cover
- Gloss Black Lower Portion
- All Necessary Hardware Included
- Easy Installation
- Comes ready to install
A Meaner and more Aggressive Look for your 2015-2020 WRX or STI
The newer style of the 2018 style bumper gives a slighter mean and aggressive look than the previous 2015-2017 years for the WRX and STI. Instead of changing your whole car, the guys over at Subispeed have made it easier for you to just change out your front bumper. Choose your paint matched color and checkout, it’s that easy!
Fully Customizable to your Liking
We’ve got everything and more for you to customize your 2015-2020 Subaru WRX or STI. Once you choose your paint matched 2018 front bumper, its your choice on what endless add ons you’d like to have added! From fog light bezels to grilles, to even front lips! We’ve got it all!
Fitment:- 2015-2020 Subaru WRX
- 2015-2020 Subaru STI
Optional Fog Light Covers / Accessories
Subaru JDM DRL Bezels with Gloss Black Finish
These are authentic Subaru Japan parts which instantly give your vehicle a unique look. As OEM parts they have been subject to a strict quality control measures which will ensure long life, proper fit, and finish. We have supplied a quick connect harness which provides a single ground and power wire for each side. They can be wired up to our DRL harness or any other 12v power source.
These are not compatible with standalone turn signals. They will require that you have turn signals mounted in your headlights already.
For more information on these bezels, please use the links below:
Subaru OEM Fog Light Bezels
These are the original authentic OEM fog light covers for the 18+ WRX / STI. We offer two of the most popular choices. Both support fog lights in the lower bumper. One has a turn signal hole while the other does not.
SubiSpeed Facelift JDM Style DRL Bezels
We have a lower cost solution for JDM style bezels. You can also choose to get a sequential turn signal in addition to the DRL. The bezels fit great and are close to OE spec.
Please see the related items below for more information.
Standard Kit
- Paint matched bumper with gloss black lower portion
- Paint matched tow hook cover
- Bumper intake covers
- Grille with center hole cover / screws (includes main Subaru emblem)
Optional Gloss Black Front Lips from Maxton
V1 and V2
Imported from Europe, these lips are constructed out of durable ABS. The finish is a high gloss black. To protect this great finish against scratches, Maxton has wrapped it in form fitting plastic which must be removed before installation.
100% compatible with 2018
For more information on these bezels, please use the links below:
Subaru OEM 2018 WRX STI Front Bumper (C7P) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (D4S) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (E8H) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (G1U) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (M7Y) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (K3X) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (K7X) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (M3Y) - 2015+ WRX / STI-simpleSubaru OEM 2018 WRX STI Front Bumper (M3Y) - 2015+ WRX / STI-simple2018+ JDM WRX S4 DRL BezelsWith a new front bumper comes the need for a new JDM S4 DRL bezel. This one is designed for WRX owners who have their turn signals integrated into their headlights. As many know, this modification can be done to a WRX Base and Premium models via modified C-lights.
Since most of our customers have non-JDM vehicles, we've adapted these to have a standard T-tap on the end. We've also included 2 extensions which can aide in connecting the lights to existing lights or our DRL harness.
NOTE: DO NOT connect 12v wiring directly to the LEDs. There is an LED driver box for each side. Connect the SubiSpeed Quick Connect harness to this LED driver box and then connect the LED driver box to the LEDs. The T-taps at the end of the Quick Connect harness will have red and black wiring. Connect the black wire to ground and the red wire to +12v.
CompatibilityThis bezel is a good choice for 2018+ WRX Limited owners who have fog lights. If you have a 2018+ WRX Base or Premium model and upgrade your C-lights to include turn signals in the headlamps, you can remove your standalone turn signals and use this bezel as well. You can also use this on STI models. Of course you'll also want to be equipped with fog lights no matter what model you have.
NOTE: Bundle does NOT include fog lights.
Quick Connect HarnessSubiSpeed knows how time consuming and confusing wiring can be. USDM vehicles don't have the exact same wiring harness as their JDM counterparts. We've updated this product to include plug and play adapters that will give you quick connects on one end (via T Taps).
This will reduce install time and make it possible for novice installers to wire up the lights without soldering or stripping wires.
NOTE: There is a factory JDM harness inside the box as well. It is recognizable by the factory style plugs on the ends. We have not removed this from the kit, but it will not be used in most USDM installations.
Installation NotesWhen wiring with factory LED headlight equipped vehicles (WRX Limited / STI), we recommend you tap the headlight wires. Find a bundle consisting on 1 red, 1 black, and 1 green wire. Tap red to red on the quick connect and black to black on both sides.
For other vehicles, we recommend one of our DRL harnesses.
Includes- 2x OEM Fog Light Bezels
- 2x OEM LED assembly
- 2x LED driver boxes
- JDM OEM Harness (not used in most installs)
- OEM Style Plugs with Quick Connectors (T taps)
gcs-15wrx-gemb-bk18wrx-fog-bezel-noturn2018+ JDM STI DRL BezelsWith a new front bumper comes the need for a new JDM DRL bezel. This one is designed for STI owners who have their turn signals integrated into their headlights. As many know, this modification can be done to a WRX via modified C-lights.
Since most of our customers have non-JDM vehicles, we've adapted these to have a standard T-tap on the end. We've also included 2 extensions which can aide in connecting the lights to existing lights or our DRL harness.
NOTE: DO NOT connect 12v wiring directly to the LEDs. There is an LED driver box for each side. Connect the SubiSpeed Quick Connect harness to this LED driver box and then connect the LED driver box to the LEDs. The T-taps at the end of the Quick Connect harness will have red and black wiring. Connect the black wire to ground and the red wire to +12v.
Quick Connect HarnessSubiSpeed knows how time consuming and confusing wiring can be. USDM vehicles don't have the exact same wiring harness as their JDM counterparts. We've updated this product to include plug and play adapters that will give you quick connects on one end (via T Taps).
This will reduce install time and make it possible for novice installers to wire up the lights without soldering or stripping wires.
NOTE: There is a factory JDM harness inside the box as well. It is recognizable by the factory style plugs on the ends. We have not removed this from the kit, but it will not be used in most USDM installations.
Installation NotesWhen wiring with factory LED headlight equipped vehicles (WRX Limited / STI), we recommend you tap the headlight wires. Find a bundle consisting on 1 red, 1 black, and 1 green wire. Tap red to red on the quick connect and black to black on both sides.
For other vehicles, we recommend one of our DRL harnesses.
Includes- 2x OEM Fog Light Bezels
- 2x OEM LED assembly
- 2x LED driver boxes
- JDM OEM Harness (not used in most installs)
- OEM Style Plugs with Quick Connectors (T taps)
2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video Also Shown In Subispeeds 2016 Grill Showcase2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S208 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S207 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video Also Shown In Subispeeds 2016 Grill Showcase2018+ WRX / STI S208 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S208 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed Video2018+ WRX / STI S208 Style Grille PinstripeHere's a low cost, simple modification that will attract a little more attention towards your vehicle. It fits both the USDM and JDM grilles.
Comes with 2 pieces so you can practice your hand at installation.
InstallationA wet installation is recommended. With wet installations a mixture of soap and water is recommended. Use one drop of dishwasher soap in a cup of water, mix, and apply to grille, and pinstripe. Simply remove the pinstripe from the backing paper and apply it to the grille after wetting. Use hair dryer / heat gun as required. Allow to dry.
SubiSpeed VideoMaxton Design Front Lip V.1Maxton Design specializes in designing and manufacturing car tuning elements. Founded in 2004 and been building since Maxton Design creates unique high quality products specializing in exterior mods.
Their products fit amazingly well due to the fact that they laser scan entire vehicles. This includes the bottom of the vehicle and that is why you'll notice small indents, arrows, and other features. All of this make it easier to align their products properly.
Installation does require drilling a hole for the mounting hardware OR using self tapping screws (not included). Also, trimming of the OEM splash guard is required.
Comes With:- Maxton Design Front Lip V.1
- Mounting Hardware
- Mounting Manual
Subispeed's How to Install VideoSplitter is in black colour. Splitter lowers the car visually and improves the grip and vehicle stability. Lip comes ready to install in a gloss black finish. Drilling is required. All mounting hardware is included.
Product is made of ABS plastic.
ABS material was created specifically for use in the automotive industry.
ABS is used in production of factory bumpers and other car body parts.
ABS products are characterized with increased strength and flexibility.
Maxton Design Front Lip V.2Maxton Design specializes in designing and manufacturing car tuning elements. Founded in 2004 and been building since Maxton Design creates unique high quality products specializing in exterior mods.
Their products fit amazingly well due to the fact that they laser scan entire vehicles. This includes the bottom of the vehicle and that is why you'll notice small indents, arrows, and other features. All of this make it easier to align their products properly.
Installation does require drilling a hole for the mounting hardware OR using self tapping screws (not included). Also, trimming of the OEM splash guard is required.
Comes With:- Maxton Design Front Lip V.2
- Mounting Hardware
- Mounting Manual
Subispeed's How to Install VideoSplitter is in black colour. Splitter lowers the car visually and improves the grip and vehicle stability. Lip comes ready to install in a gloss black finish. Drilling is required. All mounting hardware is included.
Product is made of ABS plastic.
ABS material was created specifically for use in the automotive industry.
ABS is used in production of factory bumpers and other car body parts.
ABS products are characterized with increased strength and flexibility.
Additional Information
Installation Instructions None Additional Warranty Information None
Subaru Performance OEM Paint Matched 2018 WRX STI Front Bumper / 8OEMFBWRX-BUNDLE-PARENT Fits
Subaru WRX Base2015 Subaru WRX Base2018 Subaru WRX Base2019 Subaru WRX Base2020 Subaru WRX BaseLimited2015 Subaru WRX Limited2018 Subaru WRX Limited2019 Subaru WRX Limited2020 Subaru WRX LimitedPremium2015 Subaru WRX Premium2018 Subaru WRX Premium2019 Subaru WRX Premium2020 Subaru WRX PremiumSubaru WRX STI Base2015 Subaru WRX STI Base2018 Subaru WRX STI Base2019 Subaru WRX STI Base2020 Subaru WRX STI BaseLaunch Edition2015 Subaru WRX STI Launch EditionLimited2015 Subaru WRX STI Limited2018 Subaru WRX STI Limited2019 Subaru WRX STI Limited2020 Subaru WRX STI LimitedType RA2018 Subaru WRX STI Type RA1 customer review
Average ratingEase of Installation Fit / Quality Overall Satisfaction -
Overall Very Happy
I bought this to do a facelift on my 2017 STi. The bumper came in 7 days after order. Everything was nicely packaged. The paint matched perfect. I ordered the OLM Fog Bezel with DRL & Sequential turn signal. They look and work great with the quick connect harness. If you are looking for a plug n play all included bumper or facelift for your 2015+ sti then this is the way you should go.
-
It's a match!
I actually had a dirtbike run into my 2018 STI. I didn't want to go through insurance to fix some minor body damage so I looked into two options. Going through Subaru and their paint shop came out to $3k, so I ordered this. It came in excellent packaging (scratch free and enough packing peanuts for my kids to swim in) and arrived in 3 weeks from order. The bumper paint (pure red) is perfect, the gloss black is nice and not overwhelming and everything was in order. Thanks guys!
xPrice:Actual Price:Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.Our price is lower than the manufacturer's "minimum advertised price." As a result, we cannot show you the price in catalog or the product page.
You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.Upload images for this product
Feel free to share pictures of your vehicle with this product!© 2014 Subispeed. Powered by JB Autosports. - STI