Sticker Fab
Sticker Fab Vinyl Hood Scoop Overlay (3D Carbon or Black)
2015-2020 Subaru WRX & STI
SKU: HOOD-XX-15WRX-PARENTWe price match!
Finish up the look of your WRX or STI’s hood scoop with Sticker Fab’s vinyl overlay! Available in black or carbon fiber!
5 to 6 year outdoor durability
Details
3D Carbon / Black Hood Overlay
Highlights:
- Add a new look to your Subie’s hood without hassles
- Clean, high-performance intake look
- High-quality vinyl overlay in black or carbon fiber pattern
- Drops right into the factory hood scoop opening
- Only for stock hood and factory hood scoop opening
Provides a Clean, Mean Look to your WRX or STI’s Factory Hood
Despite looking more menacing and sporty than nearly any other car on the road, the factory hood and hood scoop always look like something’s missing. The Sticker Fab Vinyl Scoop Overlay for the 2015-2020 WRX and STI aims to finish up your awesome Subie’s look by adding a sporty, performance intake look to the factory hood scoop. The Sticker Fab overlay installs into the factory hood scoop recess and adds a subtle, yet sporty appearance to your WRX or STI’s stock hood. The overlay is available in a matte black, satin black, and a 3D carbon fiber-style pattern so that you can get the perfect look for your Subie.High-Quality Vinyl with a Perfect Fit and Easy, Drop-In Installation
Sticker Fab makes each of their overlays out of quality vinyl that’s tough enough to handle both the daily grind and use down at the track. Each hood scoop overlay for 2015-2020 WRX and STIs is perfectly pre-cut which allows for an easy, drop-in installation onto your Subie build without additional trimming or cutting. The satin black version has a light gloss and fits in with the stock grille and other satin parts. The matte black version adds a high-performance flat black look and is more resistant to scratching than the standard satin. The 3D carbon option features a carbon fiber-style weave pattern and has air egress channels that make it easier to install than the other options. The overlay is only designed to work with factory hoods with the stock hood scoop. Fitment:- 2015-2020 Subaru STI
- 2015-2020 Subaru WRX
Installation
3D Carbon and matte black finishes are more resilient against scratches. While the black is much easier to work with than most black vinyl, please use extra care to not scratch it. Use a clean towel and an appropriate amount of wipe it down.
These install easily with a hair dryer and a little water / soap. Clean the surface of your hood scoop. Leave a water / soap mixture on the surface of the hood scoop and apply the same mixture to the bottom of the overlay. This will make it easier to slide the overlay into position. Once even, squeegee out the remaining water / air bubbles. Be sure not to damage the material. Most of the time you can remove the bubbles with your fingers. Use a hair dryer or heat gun (apply light heat) to the corners. This heats up the adhesive and allows the material to stretch and fit all contours. Allow 24-48 hours before washing vehicle.
Subispeed Install Video
Finishes
We have 3 choices for finishes. There's 3D Carbon Fiber, matte black, and black (pictured from left to right). Each product is rated between 5-6 years for outdoor durability.
The 3D Carbon Fiber has built in air egress channels which makes it easier to install. However, the matte black is a very forgiving material when it comes to installation. Gloss black is a little more tricky. Just take notes from the video above. For the 3D Carbon Fiber you can use products such as Armor all to clean it and keep it looking sharp. Always use a clean towel free of dust, debris, etc.
13 customer reviews
-
Dont buy this
Is too short
-
Slick look
Easy to Install, just take your time and definitely use a heat gun. Carbon fiber finish looks great.
-
Super easy to install took me like 3 minutes
-
Did not fit. At all
Lined the front up and saw there was over an inch not covered in the back. Looked so bad and cheap had to come off after wasting 30 minutes trying to make it work. Cant wait to put the duckbill wing on, wonder how bad that will be. Pretty sure this will be the last purchase from this site. Tired of issues with products.
-
Great product!
Love how this made the front of my subie look. Took about 45 minutes but looks amazing. Adds depth going into the hood scoop.
-
excellent
Another great piece. Adds some flare to the scoop. As well, There is a cat at my work that loves to sleep in the scoop all the time, and this piece will really help protect the paint! Install was a bit tricky, but with some patience it turned out great!
-
Cool design to hood scoop
Just a lil soapy water to align it and a hairdryer to adhered. Adds a nice pop to the front of the car!
-
Looks Great
Makes the scoop look way bigger and more agressive. 3D carbon blends in with WRBP paint nicely.
-
Pretty sweet
Easy to get on with soapy water, to position it correctly. Be patient & use plenty of soapy water. Looks great, love the 3D carbon look
-
Another must
Love it! Makes the scoop look larger. Really stands out.easy install. Subispeed
-
looks great, easy install
looks great, use alot of soapy water for the install, As always you should use a heat gun on medium heat. fold the residue down between the painted area and the black plastic.
-
Looks great
I got this because I loved the way it looked on the subispeed WRX and when I put it on my car it still looked great. It’s not as easy to put on as the video makes it look. I was using a hairdryer so I’m not sure if that made a difference or not.
-
Slick look
This sticker looks amazing on my car, wish I got the carbon fiber one but I'm very happy with the matte black. A bit of a pain in the butt but once you figure it out you'll be able to stick it on in no time.. I recommend this one coz it makes the car look slick!