OLM
OLM Sequential Style Headlights with 6000K HID
2013-2016 Scion FR-S / Subaru BRZ / Toyota 86
Give your already aggressive and mean looking 2013-2020 FRS, BRZ, 86 some new upgraded custom headlights from FTspeed!
8pin to 6pin conversion harness is included for use with 2013+ FR-S. Utilizes user replaceable H7 bulb.
Not E4 rated for overseas.
NOTE: The 8pin to 6pin harness has been updated to include the DRL wire in the 8pin side with a loose end hanging free. The wiring is the same as you will join both white wires and connect them to your fuse box (or another appropriate accessory power source). FR-S Release Series vehicles will need to re-pin the connector for proper operation.
Details
- Sleek, new look for your front end
- Pair OLM Sequential headlights with all HID design
- Sequential turn signal feature
- Bright DRL boomerang
- Powerful bi-xenon projector
- Highly effective projector lens
- Clear lens with black housing
- Hassle-free installation
- 8pin to 6pin conversion harness included
Awesome, New Look for your FRS , BRZ, 86's Front End
Dropping a new set of headlights into your awesome 2013-2020 FRS, BRZ, or 86 doesn’t mean you need to lose out of lighting capability or output. All you need are OLM’s very own all HID DRL Headlights with sequential turn signal. OLM’s all HID Headlights feature a hyper-aggressive look with an LED projector and a Bright DRL boomerang that completely changes up the look of your stylish FRS, BRZ, 86 build, both at night and during the day. OLM also fits these lights with powerful HID projectors that function as both the low and high beams so that you don’t have to sacrifice the OEM headlights excellent output to get a whole new look.
Installation Video
Featured In FTspeed's New Products October
Complete Pair of HID Headlights with Clear Lens and Black Housings
OLM’s headlights come loaded down with features and new functionality, all without skimping on fitment and quality. Each headlight is designed for a drop-in installation on FRS, BRZ, 86 models equipped with 8pin to 6pin headlight conversion connectors, and only require minor levels of wiring to get the DRLs up and running. The headlights are powered entirely by HIDs and feature diffusion lenses over the LED accent lights that provide a clean look without generating noticeable hotspots. The high and low beams are powered by another set of HIDs that feed their large lighting output through a specially-designed projector lens that delivers a clean beam cutoff that keeps your FRS, BRZ, 86 from blinding other drivers and makes these headlights DOT and SAE approved for street use. The headlights come standard with a black housing and a clear lens that lets the HID accents stand out and shine at their very best. Each set of headlights comes with all their necessary wiring and installation instructions.
Fitment:
- 2013-2016 Scion FRS
- 2013-2020 Subaru BRZ
- 2013-2020 Toyota 86
FR-S Release Series vehicles will need to re-pin the connector for proper operation.
People who viewed this item also viewed
11 customer reviews
-
Great product
By Collin February 20, 2023Installed these a couple days ago and am very happy with them.
-
Pretty Good
By Zenith.FRS December 10, 2022The lights are built well. However, I noticed that the light output isnt quite what I would like it to be.
-
Awesome look
By Brandon September 29, 2022These headlights look great, the light output isn't too bad
-
By Pere August 28, 2022
-
Amazing Product but be careful frs owners
By James August 17, 2022These lights look spectacular and definitely add some more flare compared to stock! But they're not perfect, as a 2013 FRS owner I can say it is not plug and play you will need to do some wiretapping for the turn signal and boomerangs to work which was fine, but unless you add a new fuse, the boomerangs/drls will only turn on when the parking light or headlights are turned on. Also be careful of where you stick the hid box because the wires are very short. Nonetheless super happy with the headlights totally buy them if you're willing to put in the extra effort, absolutely worth it in the end!! :)
-
Adds a new look
By Sushiroll July 30, 2022(2015 BRZ) With mixed reviews on these headlights, I think they are alright. It does make your car look a good bit different from stock, giving it a more aggressive look however, the light output is odd. I am getting two lines for the cutoff on both of these lights which are annoying however, it is manageable and still produces a good enough light output to see. Overall it's a good product especially if you are in a BRZ or 86 with the 6-pin as it's going to be plug and play but be warned about inconsistencies between units. You will need 3M double-sided tape to mount the ballasts. I mounted them on the underside of the headlight where the stock headlights hold their ballasts.
-
By Zapter54 May 19, 2022
-
OLM Headlights
By Kai December 26, 2021First off i’d like to say that these headlights add a very sophisticated look to your car that frankly it should’ve come with from the factory. all around very good (and incredibly blinding) headlight. one thing i will mention for all people who install this; when plugging in the oval plug from the ballast make sure that a “+” and a “-“ symbol can be visible on the top.
-
Great Product but you need to get some extra things
By Tim December 9, 2021(2015 FRS) The product overall is great, but you will need 3m tape and an extra wire some wire taps and an add a fuse for it to work the best. Also when wiring the Headlights I ended up grounding the ground wire to a nearby bolt and running the add a fuse through the back corner of the fuse box you will need to scrape out a little hole in the lid of the fuse box. Also run the wire in some plastic sleeving on the inside of the hood not in the bumper because it is a pain to remove. Also mount the ballasts in a easy to get to spot incase you ever need to replace them.
-
Great Product but you need to get some extra things
By Tim December 9, 2021(2015 FRS) The product overall is great, but you will need 3m tape and an extra wire some wire taps and an add a fuse for it to work the best. Also when wiring the Headlights I ended up grounding the ground wire to a nearby bolt and running the add a fuse through the back corner of the fuse box you will need to scrape out a little hole in the lid of the fuse box. Also run the wire in some plastic sleeving on the inside of the hood not in the bumper because it is a pain to remove. Also mount the ballasts in a easy to get to spot incase you ever need to replace them.
-
Warning to all Scion FR-S Owners! And others as well
By Andrew April 16, 2021The installation video is not entirely accurate for the FR-S models. Installing it was a very questionable process. I plugged everything according to the video and the lights would not work whatsoever and it took me hours to figure that the main plug that comes off the new orange box component to the new headlight can be plugged in backwards. So if the main light does not come on, check that plug. To add on, when connecting the new black, yellow, and green wire to where he has it installed did not work. The turn signal worked and the day light running lights did not work. We checked the day light running light wire for power and there was none whatsoever. It took much research to figure that other FR-S drivers had to directly wire the day light running light wire to the fuse box for it to even work. Another thing to add is that we asked customer service for help through email and they were completely slow and maybe sent one email back per day and they were not helpful at all. I would tell them what I did and they would ask me if I did something that I already told them that I did. Not to mention we called and nobody answered and it said to hold. It hung up on us wasting our time. The FT people called back but I was at work. Another thing to add is that I have no idea how they placed the orange box and the other box on to the crash beam because the wires are not long enough. I got the orange box to reach, but just barely. One thing that they don't tell you is that the plug for the auto adjust lights are important because they aim up and down. They have this little thing on the side of it to manually do it, but you have to turn it and turn it and turn it in order to adjust it up and down. It seems cheep. To add on to it, to adjust the lights left and right it is a golden screw right next to the light, but either you have to really have a really really short Phillip's screw driver to fit in there or you have to take the headlight out to adjust it left and right. So last but least my side marker turn signals don't work and my fog lights don't work either for no apparent reason. The lights are amazingly beautiful though. So FT Speed, please message back!
