We couldn't find any results
- Use different keywords
- Double check your spelling
- Start with something less specific - you can refine your search results later
- Try changing some of your filters below:
GCS Front and Rear Gloss Black Subaru Emblem Kit
- 2015+ WRX / 2015+ STI
Replace the stock blue and chrome Subaru emblem with a black frame and a variety of colored stars. Comes with preapplied 3M resulting in a quick modification.
Sold as a full set. Front and rear emblem inserts AND gloss black frames included.
*UPDATE* Neon stars are now available. Similar in color to the 2018+ STI Brembo brakes.
GCS brings you an affordable way to replace the factory emblems on your 2015-2017 WRX and STI. The stock emblems are fine, however these offer a little style and customization. The emblem inserts have a gloss appearance due to a clear epoxy layer.
Preapplied 3M makes installation simple.
Each set also comes with front and rear gloss black emblem frames. They are exact replicas of the OEM part to ensure proper fit. Optional emblems frames in matte and carbon fiber are sold separately. You can also resuse your chrome factory frames.
These are currently available in red, white, blue, and green. If a product option is not displayed, the item is currently on backorder.
SubiSpeed Install Video (similar product)
Also seen in New Products February 2017 Video
|Additional Warranty Information||None|
This Part Fits
19 customer reviews
Looks Great, Worth the Money
Easy to install, frame seems cheaper than the emblem itself but overall very satisfied. Replaced the 3M tape on the rear with my own, felt more secure.
Good but rear needs different tape to stick
The badges are good quality and the front went on fine, but the rear emblem tape didn’t reach the car so you need to buy tape and put another layer on but other than that it looks great.
I'm gonna say it again, EXTRA 3M!!
Overall, I'm very satisfied. I like how it looks, I went neon green for my Dark Grey WRX and I'm quite pleased. As has been stated though, make sure you have some additional 3M it a mounting adhesive of some sort. It will come up short on the grill but not TOO much.
Needs more tape
I got the black & reds, i love the look, they definitely look awesome but as others said you need more tape to put them on, other than that great product.
Great but fit could be better
Product goes on easy enough. Just use a heat gun on medium heat and OEM emblems come off rather easy with little mess. Just take your time. The front emblem needs some extra adhesive to keep it on. All in all, they look great!
I bought the white and black ones, as others described you need a bit more tape. Overall love the looks
Gloss Black/Blue stars
I purchased the gloss black frames with blue stars and they match perfectly with the WRB paint. As all the other reviews stated, you DO need extra 3m tape for the front badge! The back badge fits perfect no adjustment, but had to double up the front 3m. Overall 100% satisfied with product although extra 3m tape was half the price of this product.
I got the emblems in black and red. They go so nicely with my jdm grille and the s207 pinstripe. It was quick and easy and my front end looks awesome. Great buy.
Original emblems were scratched in shipping and Subispeed replaced right away. Used fish line and a heat gun to separate the existing adhesive for easy removal. Make sure to pick up some double sided tape for install.
I bought these to help give a more aggressive looks to the front and rear end and instantly looked better. Easy to install at about 15 min which includes removing oem logos. I went out and bought extra tape because of reading previous reviews but the kit came with two extra front badge tapes to fill the gap on the front logo. You will need both.
Quick and easy personalization!
I've been wanting to personalize the outside of my car for a while, and finally got around to starting. These badges were a great first start! Really easy, quick, and look great. Some small burs from factory are the only reason I didn't give a "5" on Fit/Quality. A few careful seconds with a razor took care of that (not that you would have noticed them after install anyway.)
I purchased the gloss black frames with the red star insert. Overall fitment was questionable and I ended up epoxying the front emblem in place. I would highly recommend purchasing the other emblem option that already comes as one piece versus the two.
overall a good piece wish my didnt come with any scraches
Great visual mod but my came with quite a few scratches on them but there wasn't a lot to return theses but overall a good mod but trim piece that goes around the badge didn't want to stick which was annoying but I just went ahead and put the badge with out it and it still looks great.
I echo the older comments - you will need additional 3M 03616 Scotch-Mount 7/8" x 15' Molding Tape to correctly install the front emblem, as the tape that is included is not thick enough to fill the gap between the front emblem and the mounting base. I also echo the install video - you will need a heat gun, piece of plastic for a pry tool, goo gone, and the above mentioned extra mounting tape. The whole procedure for front and back emblems took me under 30 minutes.
I went with the gloss black frames and white and black emblems. I could not have been happier with how they look! Totally changed the look of the car from what looks like a Whole Foods shopper to a total speed racer. So glad I went with these over the overlays.
Purchased the green emblems, and goes with all the other gloss things (fog bezels, side markers, OEM front grill). Really makes the front and back of the car look much better than OEM & vinyl overlays!! Only downside is there was not enough 3M tape for the front grill. I had to add a couple pieces in the middle of the emblem to fill in the hole behind it. Other than that very pleased with the purchase.
Blue on WRB looks awesome!
Really loving the look of these on my wrb wrx. It was a good thing I had extra 3m emblem tape. The front emblem had to be doubled up to stick, but my rear stuck fine . The look is great and fit is like oem!
Great looking emblems
Easy install and they look great. However, as the previous review stated you will need to use some sort of double sided tape to get the new emblem to seat properly, due to a small gap between the emblem and plastic.
black and white emblems and frames with that clear epoxy! So glossy and perfect! I tried the route of buying the matte black frames and doing the vinyl overlays only to be just slightly perturbed as I am a perfectionist. These are so easy to swap with a little heat gun and fishing string :) My only negative and it seems to be the current theme is that the 3m double sided tape is tooooo thin so when you go to apply only 50% attaches to the car so I bought a roll of double sided gorilla tape and snipped some little pieces all around the existing 3m and it fit like a charm. Love em!
Upload images for this product
Feel free to share pictures of your vehicle with this product!