OLM Complete OEM Style Fog Light Kit

For owners who demand the most light possible, OLM has produced a bixenon (high / low beam) projector fog light kit which is a direct replacement for the factory fog lights.

NOTE:Standard fog light projector is low beam only. For Bixenon version, please choose the upgrade in the options.

VAST IMPROVEMENT

The factory 2015 Subaru WRX / WRX STI fog lights are plastic housings with 19 watt bulbs. Many reviewers will note that they don't put a whole lot of light on the road. These projector lights are a world of difference.

They offer a sharp cutoff to prevent light from blinding oncoming motorists. This one housing gives you another set of high beams as well. There is a mechanical flap inside the projector which moves within an instant of being activated*.

Check out the comparison.

BETTER IN ALL SITUATIONS

Whether you're driving on a clear night or headed through a foggy forest, you'll enjoy the extra light. Mounted much lower than the low beams, the light can cut through the fog and still put light on the road.

HID kits are available in various colors to match your headlights or choose 3000K for extra visibility in fog or foul weather.

BEAM

Wide enough to be called a fog light but projects light far down the road like a driving light. So what do we call it? Call it what you want, however we just call it nice.

The additional light gives you the confidence to drive without worries at night.

INSTALLATION

Installation is simple! Just turn your wheels, undo some fasteners, and the factory housings can be swapped without lifting the vehicle or removing the bumper. Optionally, you can splice in the lines for the high beam signal wires.

If you do not wire up the high beam signal wire, these can be used for low beam operation only.

Benefits

Higher light output (35w HID vs 19w halogen)

Current draw does not exceed factory wiring limits

Improved visibility

Plug and Play for vehicles equipped from the factory with fog lights

Easy to install

*Please check local laws concerning running a fog light while your high beams are engaged. The factory fog lights turn off when the high beams are turned on. In order to supply power to these lamps when the high beams are engaged an additional relay and diodes will need to be used (not included).

BRZ setup includes 5202 converter harness.

Optional Items

All in One HID Upgrade

OLM's All in One HID kit is a nice upgrade from typical HID kits. It's compact design has a small overall footprint making installations clean and simple. You don't have to mount a ballast or ignitor as it is mounted to the back of the bulb.

For more information, please click here.

HID Relay Harness

For customers who are already running a number of aftermarket products, you might want to consider installing our optional relay harness. This provides HIDs power directly from the battery. It is triggered by the factory fog light wiring, but does not draw current from it.

Fog With High Beam Harness

This harness solves a huge problem for night time drivers. When the high beams are turned on, the fog lights automatically turn off. This is designed to meet certain requirements in various countries. Unfortunately this leaves objects close to the vehicle unlit. You will notice the difference especially when running an upgraded bulb or upgraded fog light housing.

Please see links to related products below for more information.

Warranty

1 year manufacturer's warranty

Customer Submitted Video

For owners who demand the most light possible, OLM has produced a bixenon (high / low beam) projector fog light kit which is a direct replacement for the factory fog lights.

NOTE:Standard fog light projector is low beam only. For Bixenon version, please choose the upgrade in the options.

VAST IMPROVEMENT

The factory 2015 Subaru WRX / WRX STI fog lights are plastic housings with 19 watt bulbs. Many reviewers will note that they don't put a whole lot of light on the road. These projector lights are a world of difference.

They offer a sharp cutoff to prevent light from blinding oncoming motorists. This one housing gives you another set of high beams as well. There is a mechanical flap inside the projector which moves within an instant of being activated*.

Check out the comparison.

BETTER IN ALL SITUATIONS

Whether you're driving on a clear night or headed through a foggy forest, you'll enjoy the extra light. Mounted much lower than the low beams, the light can cut through the fog and still put light on the road.

HID kits are available in various colors to match your headlights or choose 3000K for extra visibility in fog or foul weather.

BEAM

Wide enough to be called a fog light but projects light far down the road like a driving light. So what do we call it? Call it what you want, however we just call it nice.

The additional light gives you the confidence to drive without worries at night.

INSTALLATION

Installation is simple! Just turn your wheels, undo some fasteners, and the factory housings can be swapped without lifting the vehicle or removing the bumper. Optionally, you can splice in the lines for the high beam signal wires.

If you do not wire up the high beam signal wire, these can be used for low beam operation only.

Benefits

Higher light output (35w HID vs 19w halogen)

Current draw does not exceed factory wiring limits

Improved visibility

Plug and Play for vehicles equipped from the factory with fog lights

Easy to install

*Please check local laws concerning running a fog light while your high beams are engaged. The factory fog lights turn off when the high beams are turned on. In order to supply power to these lamps when the high beams are engaged an additional relay and diodes will need to be used (not included).

BRZ setup includes 5202 converter harness.

Optional Items

All in One HID Upgrade

OLM's All in One HID kit is a nice upgrade from typical HID kits. It's compact design has a small overall footprint making installations clean and simple. You don't have to mount a ballast or ignitor as it is mounted to the back of the bulb.

For more information, please click here.

HID Relay Harness

For customers who are already running a number of aftermarket products, you might want to consider installing our optional relay harness. This provides HIDs power directly from the battery. It is triggered by the factory fog light wiring, but does not draw current from it.

Fog With High Beam Harness

This harness solves a huge problem for night time drivers. When the high beams are turned on, the fog lights automatically turn off. This is designed to meet certain requirements in various countries. Unfortunately this leaves objects close to the vehicle unlit. You will notice the difference especially when running an upgraded bulb or upgraded fog light housing.

Please see links to related products below for more information.

Warranty

1 year manufacturer's warranty

Customer Submitted Video

OLM's Gen 2 Fog Light Housings take design queues from the original, but increases light output significantly over the previous generation. It comes with a pair of full replacement LED housings for your vehicle. These casings have an extremely wide beam pattern. We're talking around a 90 degree spread!

They utilize the latest LED and optics technology.

Optional accessories include Lamin X tint kits. With Lamin X kits, you add protection and can get it in clear, yellow, or gunsmoke.

VAST IMPROVEMENT

The spread on these lights are REALLY wide. Not only are these good for foggy situations, but you'll feel better driving down any road where objects might appear beside your vehicle.

NOTE: Previous generation Vision + DRL shown in picture.

INSTALLATION - FOG + DRL

Installation is simple! Just turn your wheels, undo some fasteners, and the factory housings can be swapped without lifting the vehicle or removing the bumper.

The factory plug provides positive and ground for the main fog light.

The DRL requires additional wiring. You must connect it to the power source you want it to turn on with. Our DRL harness is a great place to tap into for power (not included). You can also just run an add a simple fuse to the high beam fuse in the engine compartment (optional).

NOTE: DRLs can OPTIONALLY turn OFF when the fog light is ON. Previous generation Vision + DRL shown in picture.

Benefits

Current draw does not exceed factory wiring limits

Does not require mounting of items like LED drivers or HID ballasts

Improved visibility both during the day and at night

Plug and Play for vehicles equipped from the factory with fog lights

Easy to install

BRZ setup includes 5202 converter harness.

Wiring

The fog light has a standard H11 plug. The rest of the wires are shown below.

Optional Install Items

Most installation will ONLY use ONE of the items below and not BOTH.

Add a fuse - All Vehicles

This add a fuse can be plugged into the high beam fuse located in the engine compartment. This will allow for easy wiring of the DRLs. They will function as a DRL whether or not your DRL resistor is plugged in or unplugged.

DRL Harness - 2015 WRX / STI

SubiSpeed's DRL harness was originally designed for base and premium 2015 WRXs. It comes with Vision+ boomerang / C light bulbs and will allow you to keep these lights on as a DRL. The additional wiring can also be spliced into to provide power for accessories like this DRL fog. Includes harness, 2 bulbs, and 4 sets of T-taps for wiring this accessory. There is also a Limited / STI harness which can provide power for these accessories. It comes with the harness and 4 sets of T-Taps.

Parts for FR-S Owners without Factory Fog Lights

Fog Light Switch and Relay - This is a 12v relay and OEM style switch for your vehicle. It will allow you to add a switch inside the cabin and power your new fog lights with ease.

Gloss Black Fog Light Bezels - These are styled after the OEM plastic fog light bezels, but have a gloss black finish to them.

Warranty

1 year manufacturer's warranty

The market is moving towards LED lighting. OLM produced an LED fog light casing with integrated halo DRL.

Simple 12v wiring allows you to plug and play the actual light and hook up the halo to any component you want to power it. Refer to the additional tab for sample power locations.

Sold as a PAIR

APPROXIMATE COLOR TEMPERATURE

6000k

BENEFITS

Current draw does not exceed factory wiring limits

Improved visibility

Integrated DRL Halo

Plug and Play for vehicles equipped from the factory with fog lights (main light)

Easy to install

BRZ setup includes 5202 converter harness.

Instructions

Please see additional tab.

Optional Install Items

Most installation will ONLY use ONE of the items below and not BOTH.

Add a fuse

This add a fuse can be plugged into the high beam fuse located in the engine compartment. This will allow for easy wiring of the halos. They will function as a DRL whether or not your DRL resistor is plugged in or unplugged. They will turn off when your headlights are on.

DRL Harness

SubiSpeed's DRL harness was originally designed for base and premium 2015 WRXs. It comes with Vision+ boomerang / C light bulbs and will allow you to keep these lights on as a DRL. The additional wiring can also be spliced into to provide power for accessories like this halo fog. Lights will be on as a DRL AND when the headlights are on. Includes harness, 2 bulbs, and 4 sets of T-taps for wiring this accessory.

Warranty

1 year manufacturer's warranty

FAQ Where do the connectors go?

We have some instructions in the additional tab on this page, however the pictures below will help as well:

The market is moving towards LED lighting. OLM produced an LED fog light casing with integrated corona ring DRL. The DRL is extremely bright and will remind you of the lights on current, high end vehicles.

Simple 12v wiring allows you to plug and play the actual light and hook up the halo to any component you want to power it. Refer to the additional tab for sample power locations.

Sold as a PAIR

APPROXIMATE COLOR TEMPERATURE

6000k

BENEFITS

Current draw does not exceed factory wiring limits

Improved visibility

Integrated DRL Halo

Plug and Play for vehicles equipped from the factory with fog lights (main light)

Easy to install

BRZ setup includes 5202 converter harness.

Instructions

Please see additional tab.

Optional Install Items

Most installation will ONLY use ONE of the items below and not BOTH.

Add a fuse

This add a fuse can be plugged into the high beam fuse located in the engine compartment. This will allow for easy wiring of the halos. They will function as a DRL whether or not your DRL resistor is plugged in or unplugged. They will turn off when your headlights are on.

DRL Harness

SubiSpeed's DRL harness was originally designed for base and premium 2015 WRXs. It comes with Vision+ boomerang / C light bulbs and will allow you to keep these lights on as a DRL. The additional wiring can also be spliced into to provide power for accessories like this halo fog. Lights will be on as a DRL AND when the headlights are on. Includes harness, 2 bulbs, and 4 sets of T-taps for wiring this accessory.

Warranty

1 year manufacturer's warranty

FAQ Where do the connectors go?

We have some instructions in the additional tab on this page, however the pictures below will help as well:

Pictures are from a similar model light. In this model, the ground wire is not present here. Ground comes from the H11 plug.

The 2015 Subaru WRX base model does not come with fog lights. It's the only model out of the entire lineup to not have them. Most people don't feel like the standard 19W fog lights are bright enough anyways.

NOTE: Currently the switch is not compatible with 2016+ models. Please choose the 2016+ kit if you do not own a 2015.

Winjet now has the solution to get an OEM style fog light and switch installed on your vehicle. The switch is a factory fit, and lights up when the fogs are on.

Includes replica fog light bezels and glass lens light housings.

This standalone harness allows you to turn your fog lights on or off whenever the vehicle is on. You can control them independently from the low / high beams. When the high beams come on, your fog lights can remain on unlike from the factory where they turn off automatically.

*TIP - For a standard OEM style kit, choose:

1) Fog Light Housing - Standard Clear
2) Fog Light / DRL Wiring Options - None (Add a fuse recommended)
3) HID Upgrade - None

SubiSpeed Install Video

NOTE: Our video shows the use of an add a fuse which is an optional item.

Standard and Yellow Housing

Comes with 55w halogen stock

Higher light output (55w vs 19w OEM)

Improved visibility

Plug and Play

Easy to install

SAE/DOT Approved for street use

Made of High Quality OEM Grade ABS Plastic with GLASS lens

OLM Projector Housing

Requires H11 halogen bulb or HID Kit (optional)

Works extremely well with HID kits

Improved visibility

Plug and Play

Easy to install

HID compatible

SAE/DOT Approved for street use

Glass projector with metal housing. Durable plastic bulb mount

Click here for more information...

OLM Vision LED Fog Light Housings

NOTE: Do not choose an HID kit with this housing. Not required or compatible.

Current draw does not exceed factory wiring limits

Does not require mounting of items like LED drivers or HID ballasts

Improved visibility

Plug and Play for vehicles equipped from the factory with fog lights

Easy to install

Click here for more information...

OLM Vision LED Fog Light Housings

NOTE: Do not choose an HID kit with this housing. Not required or compatible. For easy wiring, consider an add a fuse or DRL / Boomerang / C-Light harness.

Current draw does not exceed factory wiring limits

Does not require mounting of items like LED drivers or HID ballasts

Improved visibility both during the day and at night

Plug and Play for vehicles equipped from the factory with fog lights

Easy to install

Click here for more information...

Wiring Diagram - Click Here

The factory 2015 Subaru WRX fog lights are plastic housings. The same goes for a number of vehicles in Subaru's lineup. They have 19 watt bulbs. Many reviewers will note that they don't put a whole lot of light on the road.

You can change all of that with our glass replacement housings. We've tested these on our vehicle and they are compatible with HID kits as well, however it is highly recommended to use a projector housing for HID lights.

Stock, they come with 55 watt bulbs which are fully compatible with the stock wiring and will put a lot more light on the road.

Optional accessories include Lamin X tint kits. With Lamin X kits, you add protection can get them in yellow to improve fog / foul weather visibility or smoked (for looks).

This is a plug and play kit as the harness will fit the new bulb directly without modification.

Installation is simple! Just turn your wheels, undo some fasteners, and the factory housings can be swapped without lifting the vehicle or removing the bumper.

Benefits

Comes with 55w halogen stock

Higher light output (55w vs 19w)

Improved visibility

Plug and Play

Easy to install

SAE/DOT Approved for street use

Made of High Quality OEM Grade ABS Plastic

NOTE: Vehicles which require a PSX24W to H11 adapter will come with them. Be sure to choose the correct model vehicle in the drop down menu.

Halogen lights produce a lot more heat vs light when compared to an HID kit. You can run a lower wattage HID kit and get more light output. In addition to this, you have the option to pick various light temperatures to improve your night time driving experience.

The stock halogen projectors do a decent job of keeping the HID light focused exactly where you want it.

Fits

2015 Subaru WRX Base and Premium Models - HID Kit

Halogen lights produce a lot more heat vs light when compared to an HID kit. You can run a lower wattage HID kit and get more light output. In addition to this, you have the option to pick various light temperatures to improve your night time driving experience.

The stock halogen projectors do a decent job of keeping the HID light focused exactly where you want it.

Warranty: 90 days
Ballast Type: AC flicker free
Ballast Details: Sealed for ingress protection (water/dust)

Fits

2015 Subaru WRX Base and Premium Models - HID Kit

Halogen lights produce a lot more heat vs light when compared to an HID kit. You can run a lower wattage HID kit and get more light output. In addition to this, you have the option to pick various light temperatures to improve your night time driving experience.

The stock halogen projectors do a decent job of keeping the HID light focused exactly where you want it.

Fits

2015 Subaru WRX Base and Premium Models - HID Kit

The 19w bulb from the factory produces an orange light and only has enough intensity to light up the road a few feet ahead.

The typical LED bulb that you see looks great in the reflector when viewing the vehicle, but they don't really put out much usable light. Even less than the 19w stock bulb.

OLM has a bulb which has a higher output and whiter light. Most people will not use fog lights for the sole purpose of navigating through fog. Many areas are not even prone to fog. A large percentage of users can benefit from a driving light vs a fog light. Placing more light on the ground during normal driving can increase a driver's situation awareness as well as those around them.

The base of the light is adjustable so you change the focal length resulting in the best output. The heat sink is also reversible in case your application demands the bulb to conform to a different profile for proper fitting.

NOTE: If your WRX / STI was made for the Australian market, we cannot recommend this bulb. The design of the fog light housing for this market is different. The housing contains an additional P13W bulb which may interfere with this one.

Crosstrek owners WITH steering response fog lights (SRF) can use this bulb. However, for Crosstrek owners WITHOUT these, you can purchase our lamp assemblies which will modify your light to an H11 socket (ie Glass replacement fog light housings).

Compatible with:

OEM fog light housings

OEM Halogen Headlights

Glass replacement fog light housings

OLM Bi Xenon Projector housings

Warranty: 1 year
IP rating: IP67
Minimum Light Output: 3520 lumens per pair
Maximum Light Output: 4000 lumens per pair
Approximate Wattage: 20-25 watts each

SAY NO TO HIDs HIDs are great for certain applications. A small, thin plastic housing is NOT one of them.

This controlled testing shows the results of a 35w HID kit mounted inside the stock 2015 WRX / STI fog light housing.

CLOSE UP In the picture below, you can see the extent of the damage on the inside of the casing.

For this application, the OLM Alpha LED fog light bulb is a great solution. It also results in much less glare than an HID kit.

Phillips Z ES LED Chip

LUXEON Z ES is a high-power 1.6mm x 2.0mm LED that enables never before seen color consistency, luminance, flux density and design flexibility for lighting solutions because it's the first ever 1-step MacAdam Ellipse warm white LED. LUXEON Z ES is undomed, a feature that provides un-matched optical flexibility for precise beam angle control. Tested and binned at application conditions, 85°C, the LUXEON Z ES emitters are an ideal choice for indoor and outdoor light sources requiring superior beam angles and superior results.

The OLM Alpha HD setup uses 8 of these precision chips to make for a competent replacement for OEM halogen bulbs.

Current Draw

Efficiency is high on this bulb's list of positive traits. As seen in the picture, at 13.5V this bulb is only drawing 1.5 amps. Power is 20.25W at this temperature.

Tuned Light Output

Straight out of the box, the OLM Alpha HD offer superior total light output and uniform color. With the adjustable base, you can rotate the light as required to change the focal length and aim of the LED chips. This ensures that the setup results in usable light which will help guide you through the hours of dusk and night.

The heatsink is also reversible if your application demands more space towards the rear of the bulb.

Plug and Play Installation

Installation of the H11 OLM Alpha HDs is extremely simple. If the socket fits, that's where it goes! The LED driver to bulb connections come with rubber seals to make sure the connection remains watertight.

The kit comes with an allen wrench for modifying the focal length of the bulb. Simply loosen the screw and rotate the base until it is in the desire position. Once you are satisfied with your setup, tighten it back down. Do not overtighten.

The allen key can also be used on the heatsink to reverse the orientation to create extra space towards the rear of the bulb.

FAQ How does the warranty work?

With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.

Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.

Do I need an HID relay?

SubiSpeed only offers HID relays when they are possibly required. We have tested the current draw of this kit and found that it does not exceed the factory wiring.

This ATM type of add a fuse is used in many vehicles. You can easily add an additional circuit without disturbing existing wiring.

Search term:

OLM

OLM Complete OEM Style Fog Light Kit

2014-2015 Subaru Forester (Non XT)

Ships for free in the 48 states

INCLUDED IN PRICE

BUNDLE ASSEMBLY OPTIONS

Details

SubiSpeed Install Video - 2015 WRX

Standard and Yellow Housing

OLM Projector Housing

OLM Vision + DRL V2 LED Fog Light Housings

OLM LED / Halo DRL Fog Light Housings

Additional Information