FactionFab Rear Brake Upgrade Kit

FactionFab Rear Brake Upgrade Kit

Rotor Highlights

• Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use.
• High-Carbon content for wear resistance, thermal stability, and cracking resistance
• Bi-directional design, meaning rotors are not side specific
• Symmetric vane castings to increase heat dissipation efficiency and thermal stability
• Double-disc ground, non-directional finish
• Mill balanced for reduced vibration
• Fully machined non-friction surfaces for perfect fitment
• Black E-Coating
• Electronically applied E-Coating for corrosion resistance
• 400-hour salt spray tested
• Fully coated inside and out

Brake Pad Highlights

• Para-Aramid Composition
• Ideal for auto-x, light track days, or aggressive street driving
• 1300ºF maximum operating temperature to aid in fade resistance
• Excellent modulation and initial bite
• Pre-scorched compound to aid in cold weather modulation
• O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
• Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
• Positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
• Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
• Mechanically attached application specific pad shims are designed to eliminate noise associated with brake pad vibrations
• REAR LOCATION

The Perfect Brake Upgrade Kit for Your Fast 2018-2020 Subaru STI

Looking to upgrade your 2018-2020 Subaru STI rear brakes for your aggressive track driving? Like Auto-X or a track day. Check out this Rear brake upgrade kit from FactionFab, available at Subispeed!

Designed and Constructed for Speed

O.E gas slots and chamfers ensuring efficient, safe stopping, while reducing noise associated with vibration. Positive molded technology provides reliable, safe stopping performance for the entire service life of the brake pad. This manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad. Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking. The prescorched compound to aid in the cold weather modulation.

The FactionFab Swept Slot Bi-Directional Rotor is ideal for street use and for the occasional spirited drive and will improve your overall braking response, brake cooling, and thermal stability, pad cleanliness, and overall increased braking performance in any situation.