FactionFab Front Brake Upgrade Kit

FactionFab Front Brake Upgrade Kit

FACTIONFAB SWEPT SLOT BI-DIRECTIONAL ROTOR PAIR FRONT

• Front location
• Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use
• High-carbon content for wear resistance, thermal stability, and cracking resistance
• Bi-directional design, meaning rotors are not side-specific
• Symmetric vane castings to increase heat dissipation efficiency and thermal stability
• Double-disc ground, non-directional finish
• Mill balanced for reduced vibration
• Precision machined with run-out spec of no more than .002", Disc Thickness Variation (DTV) of .0005"
• Fully machined non-friction surfaces for perfect fitment
• Sold as a pair
• Electronically applied E-coating for corrosion resistance
• 400-hour salt spray tested
• Fully coated inside and out

FACTIONFAB F-SPEC FRONT BRAKE PADS

• Front location
• Para-Aramid Composition
• Ideal for auto-x, light track days, or aggressive street driving
• 1300ºF maximum operating temperature to aid in fade resistance
• Excellent modulation and initial bite
• Pre-scorched compound to aid in cold weather modulation
• O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
• Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
• The positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
• Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
• Mechanically attached application-specific pad shims are designed to eliminate noise associated with brake pad vibrations

FACTIONFAB STAINLESS STEEL BRAKE LINES

• Front location
• PTFE Teflon inner liner to carry the fluid
• Stainless steel woven middle layer for support of the inner liner
• Abrasion-resistant, impact-resistant
• Outer PCV clear abrasion resistant coating to aid in chaffing and protects the inner layers and stress relief at fitting locations
• Each line is 4500psi burst pressure tested
• Stainless steel precision machined fittings for perfect fit and corrosion resistance
• Increased pedal feedback as a result of the elimination of soft rubber lines which are prone to swelling and deforming
• 100% model specific for perfect fitment
• Includes hardware

MADE TO IMPROVE THE STOPPING POWER TO THE FRONT LOCATION OF YOUR 08-17 STI

Here, you are looking at the FactionFab Brake Upgrade Kit. This kit includes new rotors, brake pads, and stainless steel brake lines to improve the braking performance of your vehicle. This is a great upgrade for those of you who need to replace your worn or high-milaged braking components with FactionFab units that are known to be engineered by the best. This kit will provide more than optimal performance for the daily driver or weekend show car, and will provide the stopping power needed for the occasional weekend autocross or spirited canyon run.