Customize your vehicle with simple vinyl overlays available in different colors.
Comes with a total of 4 overlays on a sheet. Two are for you to apply and two more if you have an accident applying them and need a spare. Constructed of hand laid vinyl. This ensures the longest durability vs printed vinyl.
3D Carbon vinyl is textured and has a more authentic feel to it. Carbon fiber look is closer to the trim pieces inside the vehicle.
These install easily with a hair dryer and a little water. A drop of dish washer soap can also be used on the matte black and carbon fiber look versions. The use of water and soap make it easier to position the emblems and can help allow air to be removed from under the surface of the overlay.
Clean the OEM emblems and put water on it and the overlays. Position the overlay and press down. A hairdryer can be used to promote adhesion and improve fit. Allow 24-48 hours before washing vehicle. Comes with two complete sets.
NOTE: Front emblem is larger than rear.
This Part Fits
- 2015-2020 STI Front and Rear Emblem Overlays
- 2015-2020 WRX Front and Rear Emblem Overlays
|Installation Instructions||Please see main description for specific instructions.|
|Additional Warranty Information||None|
21 customer reviews
Easy on, looks good, but don't get too rough with washing.
These are great if you don't want to be removing things and paying for full replacements. I've had them on since August 2016 and they show no sign of coming off, discoloration, or wearing down. But I did notice that if you are a little rough while washing you can pull some of the fibers off. So go easy as to not wear them out prematurely.
Very cheap, but quality stickers that add the perfect touch to the car. Comes with 2 front and 2 rear, can't beat that!
This has been the best purchase aesthetic wise for my wrx, really makes the difference and gets the attention of others
Ordered a set of these and they sent me 2 of each.. .Glad they did since I ruined the first one ... Takes some finesse to get just right, but now looks good ... Really its just a sticker , wasn't expecting it to look like OE or anything, but really changes it up and for the $ a great addition ... !!
I got the textured black background and blue star, they look and fit beautifully, they help complete the look. Next buy is full carbon fiber replacer.
Fromt and Rear overlays
I have a 18’ WRX in white and I purchased the carbon and black overlays. The look great on a pearl white car
Looks great and easy to install
I have had these emblems on my car for a least a year. I have a membership to an unlimited brush style car wash and have had no problems. I messed up my first attempt installing them but I have been really impressed with how much abuse they could take. They even survived Harvey......sadly the car didn't....
Super easy to install, they included extras knowing people are gonna mess up. I got the 3d carbon fiber ones with white stars. Looks awesome on my white 2018 wrx!
Pretty cool touch !
Black carbon fiber 3D with white stars and I like it a lot !
Nice subtle exterior upgrade!
Out of the two front-specific emblems I received, one had the backing wrinkled and the back side with the adhesive had gotten dirty where it came off, which meant I had to get it right with the first overlay...because the stock emblem has a little curvature to it's surface, this was a little tricky and even after several attempts I had a little bleed over onto the chrome trim ring. I used a sharp razor blade to trim the edge and it looks fine now, but the overlay wasn't cut to 100% match (although better to be a little bigger than too small). Despite those minor issues, I am still pleased with the look of these overlays and the result is a better aesthetic than the stock OEM emblem provides. As mentioned on my review for the steering wheel overlays, my only other criticism is that these could have been shipped for less than the "cheapest" option that Subispeed offers.
Perfect fitment front & back
These look fantastic, I've gotten the 3D carbon look along with several other overlays to keep adding to the subtle look that these offer. It's a nice way to stand out from all the rest.
Is what it is
These are very high quality stickers. I'm not too happy with the front emblem fitment as it seemed to be about 1-2mm too small. The rear emblem fit great. Some minor wrinkles around the edges. I installed dry after cleaning the emblem with an alcohol wipe. I'll likely try to install the second set using the water, dishsoap, and hair dryer method.
Emblem overlays (stickers)
Kinda cheap but they are what they are... I got the matte black with white stars. They look pretty good and I was able to get all of the bubbles out etc... You can take em off and restick easily to try to get that perfect fitment but mine has a few little wrinkles on the outside edge etc... Nice but not great. I feel kinda blah as for now. I would rather buy and emblem all done up like the black with red stars but I prefer white so this was my avenue. Pretty cheap and it does differentiate your car from the pack
If you live in a hot area...
When I received mine, I went straight to the car, cleaned up the emblems and got ready to put these on.
As I tried to peel off the vinyl, it seemed like the vinyl had stuck to the paper backing. I couldn't for the life of me peel off the paper backing. So one of them was wasted.
It was hot outside, so I figured I'd try putting the others in the fridge to let it cool off, to see if that helps (this was my first time using vinyl anything). Took it out about half an hour later, let it sit for another 5 or so minutes. Tested it and it had trouble peeling off at first, but I was able to get it to peel off the paper.
I live in southern California, just a heads up.
For $12, you can't go wrong!
Received these the other day (only received 1 front, and 1 rear, which SubiSpeed QUICKLY fixed by sending out another pair, no charge!).
These things fit like a glove! I used the soapy water method with heat after, and you literally cannot tell its an aftermarket overlay. Such a small, subtle change, yet I've already got comments on where I got my "emblems" and how much.
Highly recommended! Plus the added fact that they fixed the minor quantity error, you can't go wrong.
Front/Rear Red Stars w/ Carbon Fiber
Put the front and rear decals on last night, and they look fantastic! Really makes both ends of the car pop! My other WRX friends are already going to order a set after I sent them pics of mine! Thanks Subispeed!
looks an fits great. BUT they are not marked very well. Just look for the small f on back in pencil Other then that it was easy to but on.
Fits perfect. Super adhesive, but very forgiving just in case you need to pull it off and reapply it. Looks superb.
White over CF
Went with White over Carbon Fiber, could not be any more pleased. The fit is absolutely perfect. Ease of installation allows you to make your car look that much more awesome!
When I got them I was a little worried about quality. But once I put them on the car, they looked great! Also, they are very forgiving, and therefore easy to put on well. I am happy overall.
Upload images for this product
Feel free to share pictures of your vehicle with this product!