3D Carbon / Black Hood Overlay
Add some unique styling with a minimum amount of effort and cost. Once applied, this product should last even longer than your car payments!
This is a vinyl product and has no actual carbon fiber content. Machine cut. This is NOT a universal product. The material has been cut down specifically for this application.
3D Carbon and matte black finishes are more resilient against scratches. While the black is much easier to work with than most black vinyl, please use extra care to not scratch it. Use a clean towel and an appropriate amount of wipe it down.
These install easily with a hair dryer and a little water / soap. Clean the surface of your hood scoop. Leave a water / soap mixture on the surface of the hood scoop and apply the same mixture to the bottom of the overlay. This will make it easier to slide the overlay into position. Once even, squeegee out the remaining water / air bubbles. Be sure not to damage the material. Most of the time you can remove the bubbles with your fingers. Use a hair dryer or heat gun (apply light heat) to the corners. This heats up the adhesive and allows the material to stretch and fit all contours. Allow 24-48 hours before washing vehicle.
Subispeed Install Video
We have 3 choices for finishes. There's 3D Carbon Fiber, matte black, and black (pictured from left to right). Each product is rated between 5-6 years for outdoor durability.
The 3D Carbon Fiber has built in air egress channels which makes it easier to install. However, the matte black is a very forgiving material when it comes to installation. Gloss black is a little more tricky. Just take notes from the video above. For the 3D Carbon Fiber you can use products such as Armor all to clean it and keep it looking sharp. Always use a clean towel free of dust, debris, etc.
This Part Fits
- 2015-2020 STI 3D Carbon / Black Hood Scoop Overlay
- 2015-2020 WRX 3D Carbon / Black Hood Scoop Overlay
|Additional Warranty Information||None|
9 customer reviews
Love how this made the front of my subie look. Took about 45 minutes but looks amazing. Adds depth going into the hood scoop.
Another great piece. Adds some flare to the scoop. As well, There is a cat at my work that loves to sleep in the scoop all the time, and this piece will really help protect the paint! Install was a bit tricky, but with some patience it turned out great!
Cool design to hood scoop
Just a lil soapy water to align it and a hairdryer to adhered. Adds a nice pop to the front of the car!
Makes the scoop look way bigger and more agressive. 3D carbon blends in with WRBP paint nicely.
Easy to get on with soapy water, to position it correctly. Be patient & use plenty of soapy water. Looks great, love the 3D carbon look
Love it! Makes the scoop look larger. Really stands out.easy install. Subispeed
looks great, easy install
looks great, use alot of soapy water for the install, As always you should use a heat gun on medium heat. fold the residue down between the painted area and the black plastic.
I got this because I loved the way it looked on the subispeed WRX and when I put it on my car it still looked great. It’s not as easy to put on as the video makes it look. I was using a hairdryer so I’m not sure if that made a difference or not.
This sticker looks amazing on my car, wish I got the carbon fiber one but I'm very happy with the matte black. A bit of a pain in the butt but once you figure it out you'll be able to stick it on in no time.. I recommend this one coz it makes the car look slick!
Upload images for this product
Feel free to share pictures of your vehicle with this product!