3D Carbon / Rear Bumper Overlay
Add some unique styling with a minimum amount of effort and cost. Once applied, this product should last even longer than your car payments!
This is a vinyl product and has no actual carbon fiber content. Machine cut. This is NOT a universal product. The material has been cut down specifically for this application.
3D Carbon and matte black finishes are more resilient against scratches. While the black is much easier to work with than most black vinyl, please use extra care to not scratch it. Use a clean towel and an appropriate amount of wipe it down.
These install easily with a little water / soap. Clean the application area of your rear bumper. Leave a water / soap mixture on the surface of this area and apply the same mixture to the bottom of the overlay. This will make it easier to slide the overlay into position. Once even, squeegee out the remaining water / air bubbles. Be sure not to damage the material. Most of the time you can remove the bubbles with your fingers. Focus on the alignment of the visible edge of the vinyl. Contour the vinyl to the curve of the bumper. Allow 24-48 hours before washing vehicle.
Subispeed Install Video - Similar Product
We have 3 choices for finishes. There's 3D Carbon Fiber, matte black, and black (pictured from left to right). Each product is rated between 5-6 years for outdoor durability.
The 3D Carbon Fiber and black materials have built in air egress channels which make them easier to install. However, the matte black is a very forgiving material when it comes to installation. Just take notes from the video above. For the 3D Carbon Fiber you can use products such as Armor all to clean it and keep it looking sharp. Always use a clean towel free of dust, debris, etc.
This Part Fits
- 2015-2020 STI 3D Carbon / Black Rear Bumper Overlay
- 2015-2020 WRX 3D Carbon / Black Rear Bumper Overlay
|Additional Warranty Information||None|
6 customer reviews
Looks great in the back
Makes the back stand out, went well with my APR Carbon Fiber trunk garnish, it doesn't fit exactly since I have a clear protective layer in the back and noticed that it doesn't cover the whole thing. 2019 WRX Limited.
This is a great piece. Will save a lot of paint damage for those that use the trunk a lot. Install was a piece of cake.
Very simple to install.. very satisfied with the product.. definitely give your trunk area a nice look..
Easy to install with soapy water. Looks great & love how it gives a little extra to the back of the car
looks great, easy install
looks great, good breakup for your eye. use soapy water for the install, As always you should use a heat gun on medium heat.
Easy to install once you get the hang of it. Recommend spraying water/soap on for easy adjustment. Adds custom look to the car. Satisfied with purchase!
Upload images for this product
Feel free to share pictures of your vehicle with this product!