The short answer is no. We leave our vehicles in the shop quite frequently and especially during the winter months when we aren't able to film track events. We have not had an issue starting our vehicles because of the tail lights. If you leave your vehicle in storage all winter, you should already disconnect your battery to save it from dying (or put it on a trickle charger).
2015+ WRX / WRX STI TR Style Tail Lamps (USDM)
Headlights and tail lights play a huge role in the overall look of the vehicle. While the WRX / STI have some great styling, the door was still left open for a more aggressive aftermarket solution. Original design cues from the headlamps were taken and incorporated into the design. These are factory plug and play units for the 2015+ VA platform*. They are wired for US spec vehicles.
Color options complement those offered for the F1 Style Rear Fog Light.
SubiSpeed began this project in May of 2014. At this time the tail light design and production was just a concept. The first sample was ready around 12 months later. From here the tools to create these lamps were tuned even further until a production ready sample was complete days before Jan 1st 2016.
This product incorporates a lot of ideas and the efforts of many. We hope you enjoy your vehicle and the opportunity you have to customize it.
Subispeed Tail Lights New Finish CBW
Additional SubiSpeed Videos
SubiSpeed Release Video
SubiSpeed TR Style Sequential Tail Light Showcase
Solid or Sequential Turn Signal
The SubiSpeed tail light has two options for turn signal operation. It can behave like a standard tail light with simple on / off lighting. You can also utilize the built in sequential turn signals. A switch built into the wiring allows a quick change from one mode to the other.
Tail As Turn Compatible
A popular question among our customers was if the tail as turn module was compatible (if you don't know what the tail as turn module is, please see the related parts links at the bottom). The answer is a solid YES. You can skip the amber turn signals and use the brake light as a turn signal. Everyone has their preferences and this allows for even greater customization!
SubiSpeed Installation Video
Installation can be complete in under 45 minutes by most. We include all the wiring required to get the job done. Follow Kevin as he installs a set on our 2015 WRX.
- Pair of Tail Lights pre wired for USDM Vehicles
- Power Harness with switch for Sequential Turn Signals
- Add a fuse
Our video will help your through the installation process. However, just so that you know, everything is plug and play except for 1 wire. There is a power wire that must be run through the trunk and along the sides in order to provide power for the sequential turn signals. An add a fuse is included for easy installation. You will use the add a fuse in the driver's side fuse box inside the cabin (by your left knee when seated). We chose the 15A F. Fog fuse on the bottom row, 3rd from the left.
*A power wire must be run from the trunk to the driver's side fuse box located inside the cabin for proper operation of the sequential turn signals.
Limited 1 Year Warranty
These tail lights are warrantied by SubiSpeed for a period of *1 year. Please send pictures with any requests for warranty service. This warranty includes lights malfunctioning or burning out. Please see additional tab for more information.
This Part Fits
- 2015-2020 STI SubiSpeed USDM TR Style Sequential Tail Lights (CB)
- 2015-2020 WRX SubiSpeed USDM TR Style Sequential Tail Lights (CB)
|Additional Warranty Information||
Limited 1 Year Warranty
These tail lights are warrantied by SubiSpeed for a period of *1 year. Please send pictures with any requests for warranty service. This warranty includes lights malfunctioning or burning out. Tail lights will be warrantied for a period of a minimum period of 6 months for condensation. Special gaskets have been included to prevent condensation. Some climates with extreme temperature changes are more likely to develop condensation. Once an issue is reported, the date will be documented so that the issue may be resolved outside of the standard warranty period.
Warranties are non-transferable.
Please refer to local laws as far as determining on road use of these tail lights. They contain front and side reflectors by law and are visible clearly during day and night time use.
SAE A(2)S(2)I(3)TP2R 16 DOT
You might also like...
10 customer reviews
Very good looking taillights to have if you're not a fan of the stock red ones. My driverside turn signal became defective after a couple weeks but it was promptly replaced under warranty by Subispeed so thumbs up for that.
My biggest and only complaint would have to be that if your running lights are on during the day the red isn't really bright enough so it looks pink (if youre into the whole pink cherry blossom thing I suppose its a plus). However at night it looks solid and bright red. This might be just a problem with clear ones, the darker tinted could be better.
Transformed my Subie!
Couldn't be any happier with these tail lights. installation was simple especially since now its only plug and play. I did have one that the turn signal stop working after 9 months but Brian from customer support really helped me out when it came to having it replaced and I received it from the warehouse to VA in 3 days. So don't hesitate and just buy them already you know you want to!
Quick install, super easy plug and play, and wow what a rear end now with this simple upgrade, cleans up the back end very nicely!!! Highly recommend!!!
Totally worth it
Looks so much better. Plug and play, install took less than 10 minutes. No cutting wires nor adding any additional wires. Subispeed includes moisture absorbent which is a nice touch of "we care." Very satisfied.
Great lights, easy install
They fit like a glove, installed in 30min. The version 2 don’t require you to run the wires to the fuse box, just flip a switch on the light to turn them into sequential. They look fantastic and I couldn’t be happier with them.
So great so easy
Look like a million bucks! Completely plug-n-play you control the sequential tail light function with a switch on the light on install! Went in in about 30 min. Love em!
The video says you need to run a wire for sequential signals...byou don't need to there's a built in switch on the back of the lights...its that easy and they look amazing.
Thanks to Subispeed's install video these are super easy to put in. They look great and are of high quality. Lot's of compliments will follow!
Must have Mod!!
Utterly beautiful. Super bright LED lights. Adds an awesome aggressive and unique look to the rear of your car. Turning heads already. Easy installation with the follow along YouTube video above. Worth the money.
Very easy mod and totally changed the look of the vehicle. Came with everything I needed, quick delivery and it can't get any easier to install specially with the videos on line. Thanks Subispeed
Upload images for this product
Feel free to share pictures of your vehicle with this product!