Fog Lights

OLM Fog with High Beam Harness - 2015+ WRX / 2015+ STI / 2013+ FR-S / 2014+ Forester / 2013+ Crosstrek

Be the first to review this product

$64.95

SKU: olm-h11-fog-high-harness

Out of Stock

This harness solves a huge problem for night time drivers. When the high beams are turned on, the fog lights automatically turn off. This is designed to meet certain requirements in various countries. Unfortunately this leaves objects close to the vehicle unlit. You will notice the difference especially when running an upgraded bulb or upgraded fog light housing.

NOTE: Does not work with vehicles that have LED Low and High beams in the same projector. Vehicles with LED low beam and separate halogen high beams ARE compatible though (ie 2015-2017 STI).

Description

Details

This harness solves a huge problem for night time drivers. When the high beams are turned on, the fog lights automatically turn off. This is designed to meet certain requirements in various countries. Unfortunately this leaves objects close to the vehicle unlit. You will notice the difference especially when running an upgraded bulb or upgraded fog light housing.

With the OLM Fog with High Beam Harness installed, your fog lights will be on whenever the high beams are on. They will ALSO function NORMALLY when your low beams are on. If you have the stalk set to have the fog lights off with the low beams, they will remain off and only come on when the switch on the stalk is turned on OR the high beams are on.

Power is safely supplied from an additional relay with fuse. This removes the load off of the stock wiring for safe install.

NOTE: For offroad use only. Please obey local laws when using this product. If you have not disabled your DRL resistor, the fog lights will be on when your DRLs are on. For notes about use with the OLM Bi-Xenon Low / High Projector Fog Lights, see additional tab.

Newer model vehicles with LED Low and LED High beams in the same projector will require modification. Please see additional tab as well.


This Part Fits

  • 2015-2017 Subaru STI OLM Fog with High Beam Harness
  • 2015-2017 Subaru WRX OLM Fog with High Beam Harness
  • 2014-2018 Subaru Forester OLM Fog with High Beam Harness

Additional

Additional Information

Installation Instructions

OLM Bi-Xenon Projector Kit Use

When used with the OLM Bi-Xenon Low / High Beam Projector fog lights, you will need to attach the signal wires for the mechanical flaps to specific locations. They can be tapped into the stock high beam wires from the vehicle for both sides OR on the driver's side, they can be tapped into the 9005 splitter portion.

Vehicles Equipped with LED Low AND High Beams

This note is just for vehicles that use the same projector for the low and high beams. Additional modification will be required.

Additional Warranty Information None

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Upload images for this product


Feel free to share pictures of your vehicle with this product!