Exterior

OLM MOAB Multicolor LED Fog Light Bulb - 2015+ WRX / 2015+ STI / 2014+ Forester / 2013+ Crosstrek (SRF)

$84.95

SKU: olm-h11-fog-moab

 

Replace the dull, orange halogen factory fog lights bulbs with a pair of OLM MOAB bulbs. Each pair comes with filters to allow for a wide selection of color output.

From the easy on your eyes in fog / foul weather 3000K output to the clearly aftermarket bluish hues in the upper range, the MOAB bulb lets you dial in your desired output.

ETA: Next batch is scheduled for delivery at the end of June 2018.
Reset Configuration

* Required Fields

$84.95

Description

Details

OLM's MOAB line of bulbs are designed to truly be the Mother of All Bulbs. Their compact design with passive cooling allows for easy installation in the tightest locations. This bulb is the first in OLM's line that gives the customer complete control of the output. Included are a variety of filters which will allow you to select the desired output.

Most vehicles still use standard halogen bulbs for fog light bulbs. These produce a lot of heat, draw a higher amount of current, and produce a dull orange light. The lifespan of these bulbs are also shorter than HIDs and LEDs. The MOAB will give you brilliant light with much more lumens per watt.

NOTE: If your WRX / STI was made for the Australian market, we cannot recommend this bulb. The design of the fog light housing for this market is different. The housing contains an additional P13W bulb which may interfere with this one.

Crosstrek owners WITH steering response fog lights (SRF) can use this bulb. However, for Crosstrek owners WITHOUT these, you can purchase our lamp assemblies which will modify your light to an H11 socket (ie Glass replacement fog light housings).

For the longest time, LED solutions were not able to produce enough life to be a safe alternative to halogen bulbs or HIDs. This is not the case anymore with chips such as the CREE XHP50 and CREE XM-L2.

Despite the changes in design vs stock, the bulb is still plug and play. The integrated LED driver does not have to be mounted for proper installation or a clean install.

Installation is as simple as installing a normal OEM bulb.

NOTE: For vehicles built specifically for the Australian market, we cannot recommend this bulb. The design of the fog light housing for this market is different. The housing contains an additional P13W bulb which may interfere with this one.

Compatible with:

  • OEM fog light housings
  • Glass replacement fog light housings
  • OLM Bi Xenon Projector housings

Color temp: 3000K / 4300K / 6500K / 8000K / 10000K
Quantity: Sold as a PAIR
Warranty: 1 year


SAY NO TO HIDs

HIDs are great for certain applications. A small, thin plastic housing is NOT one of them.

This controlled testing shows the results of a 35w HID kit mounted inside the stock 2015 WRX / STI fog light housing.

CLOSE UP

In the picture below, you can see the extent of the damage on the inside of the casing.

For this application, the OLM MOAB Multicolor LED fog light bulb is a great solution. It also results in much less glare than an HID kit.


CREE XHP50 - MOAB

Powered by Cree’s groundbreaking SC5 Technology™ Platform, the XLamp XHP50 LED is a member of Cree’s Extreme High Power (XHP) class of LEDs that redefines lumen density and reliability to radically reduce system costs by up to 40 percent. At its maximum current, the XHP50 LED delivers twice the light output of the industry’s brightest single-die LED, the XLamp XM-L2 LED, at a similar lumens per watt and without increasing the package footprint. The XHP50 LED also achieves longer lifetime at higher operating temperatures. The overall result is significantly lower thermal, mechanical and optical costs at the system level.

This improved resistance to heat works well with the demands of automotive applications.

Approximate output is 3000 lumens per pair.


CREE LM-2 - MOAB Lite

Highest-Performing, Commercially Available, Single-Die LED

Delivering breakthrough lumen output and efficacy in the XM package, the XLamp XM-L2 LED is the highest-performing, commercially available, single-die LED. Built on the SC³ Technology Platform, the XLamp XM-L2 LED delivers up to 20% more lumens and lumens-per-watt and double the lumens-per-dollar of the original XM-L. The XM-L2 LED offers the unique combination of high efficacy and high lumen output at high drive currents, delivering an unprecedented 1198 lumens at 116 lumens-per-watt efficacy at 3 A, 25°C.

Approximate output is 2500 lumens per pair.


CURRENT DRAW

When replacing lights on your vehicle with aftermarket products, current draw should always be a concern. The HP LED bulbs have a low current draw for the amount of light they output. At 14V, the current draw is only 1.4-1.5 amps. (*Voltage is typically higher than 12.5V when the alternator is running)

FAQ

With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.

Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.

Housings can vary in size across all vehicles which use H11 bulb. If you feel the bulb is loose, simply remove the gasket on your stock bulb and place it at the base of this bulb as seen in the picture below.

In general this will fit vehicles which use an H11 bulb. Please verify your bulbs if your vehicle is not listed below. The sizes are listed in your owner's manual.

We only offers HID relays when they are possibly required. We have tested the current draw of this kit and found that it does not exceed the factory wiring.


This Part Fits

  • 2013-2017 Crosstrek OLM MOAB Multicolor LED Fog Light Bulb
  • 2015-2017 Subaru WRX OLM MOAB Multicolor LED Fog Light Bulb
  • 2014-2018 Subaru Forester OLM MOAB Multicolor LED Fog Light Bulb

Additional

Additional Information

Installation Instructions No
Additional Warranty Information

OLM Warranty

This OLM product is warrantied for a period of one (1) year from purchase. A valid invoice is required to process all warranty claims and the warranty applies to the original owner only. It is non transferable. By purchasing this product you agree to the terms of the warranty.

To obtain warranty service from products purchased on this site, please visit this link. Additional guidance will be provided at that time. Do not discard the product prior to receiving approval from a representative. Depending on the nature of the issue, pictures may need to be required to troubleshoot the item(s). Various products will have to be sent back to be bench tested to verify defects.

Anything that is received DOA must be noted within 14 days of receipt. They will be replaced immediately as long as there is stock of the product available.


OLM is not responsible for damage during installation or due to acts of God, misuse, abuse, negligence, accident, unreasonable use, or by causes unrelated to defective materials or workmanship. The product must be in its original, un-modified state (ie free of custom wiring and modifications).

Products that have reached end of life may be substituted for similar products.

8 customer reviews

Average rating
(based on 8 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Much need upgrade, very high quality.

    By Nick H February 09, 2018

    The second night after I got my 2017 WRX I had to drive in rainy fog and couldn't see anything! I got myself some of these MOABS and they are amazing. I went with the 3000k yellow filters. The whole car is now lit up around the front and sides. Much much brighter than stock.
    The bulbs are about 3 times the size of the stock bulbs and are very high quality. Install was so easy. You can actually just pry the splash guard out from under the front lip and stick your hand up under the bumper, then pull out the old light and wire hookup. Attach the new bulbs and plug them in. It took about 3-5 minutes each side. Great upgrade and looks awesome on my 2017 Black WRX.

  2. Makes the car Pop

    By Mark April 23, 2017

    Super easy to install, just get some rhino ramps and lift up the front end of the car.

    I'd say the hardest part was making sure the film was properly wrapped around the LED bulb, if you have the slightest area not covered it can completely screw up the yellow look.

    Now if only I could get these running as DRL... Hmm sure there is a mod out there somewhere.

  3. Compliments the OLM HID kit perfectly

    By Lloyd January 03, 2017

    Installed the olm hid kit and the vision boomerang lights last week and noticed how poorly the stock fog lights looked in comparison. Ordered these moab lites, got them today, and spent maybe 10 minutes installing them. Super easy, and they look AWESOME. They match PERFECTLY. Fantastic looking product, and fit/install was a cakewalk too.

  4. Excellent Fog Light Upgrade

    By Kevin December 26, 2016

    The installation was extremely easy. Got ride of the ugly amber fog light that comes stock with the WRX and replaced it with the MOAB Lite on my WRX with 3000k yellow laminex. It was the exact yellow I was looking for. I was worry that the bulbs weren't going to fit correctly because I heard from other people that other brands LED fog light bulb don't fit on the WRX tightly but the OLM LED fog lights fitted extremely snug which is a good thing.

  5. PERFECT LIGHTING UPGRADE

    By daniel August 06, 2016

    Quality of product is perfect.

  6. Nooice!

    By Dominick January 05, 2016

    Installed the MOAB Lite on my WRX Premium w/ yellow laminex. 100000% better visibility with these and a 10 min (if that) install.

  7. 100% first class

    By james December 06, 2015

    Quality of product is just fantastic. Fit is 100% and they are very bright. I have the moab lite great colour choice easy to apply film on lamp.

  8. Easiest lighting upgrade I've ever done

    By Stephen November 16, 2015

    I was expecting to have to mount LED drivers somewhere behind the bumper near the bulb... NOPE.. simple direct replacement. Plugged right into factory wiring. Subispeed states that this kit ( I got the 3000LM ) doesn't exceed the factory wiring amperage so no problems there. Simply take 4 clips out. Peal back bottom guard and change them like you would Halogen bulbs. Looks awesome. I'm currently running the 3000k and the light output is amazing. Can't wait for it to snow this year to see how it lights up the night. Plan on ordering this kit for my Hi's and low beams as well. Definitely worth the money.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!