SubiSpeed

SALE
Mishimoto Performance Front Mount Intercooler Kit (*CARB CERT) - 2015-2018 WRX

Mishimoto Performance Front Mount Intercooler Kit (*CARB CERT) - 2015-2018 WRX

$1,096.00

$1,529.83

SKU: MMINT-WRX-15

Ships From Factory

Ships for free in the 48 states
Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX FMIC Kit will provide your Subaru with the ability to make the most horsepower and torque possible.

NOTE: The 2018+ bumper will require shaving for proper fit.
Reset Configuration

* Required Fields

$1,096.00

$1,529.83

Description

Details

Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. The Mishimoto front-mount intercooler was designed with a large 28" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The Mishimoto WRX front-mount intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile.

CARB EO #: D-759

Mishimoto Video

The Mishimoto Subaru WRX Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25" in diameter to keep airflow velocities high, giving your car an instant response without excessive throttle lag that plagues many front-mount intercooler designs. The hot-side pipe also features a CNC-machined flange for a leak free connection to the turbo. The cold side of the system features 2.5" to 2.75” mandrel-bent aluminum tubing for maximum airflow, and to match the diameter of your throttle body.

This 2015 WRX front-mount intercooler kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting of the front bumper or drilling is required to install the crash bar and intercooler. The kit includes all necessary mounting brackets, including a new bracket for the air intake. Their WRX front-mount intercooler kit also includes every coupler and clamp you need for a clean install, and compliments the Mishimoto Subaru WRX Performance Air Intake for added cooling power. Mishimoto tested this intercooler on their Stage 2 265whp WRX to find significant drops in AITs (air intake temperatures), and the intercooler has also been flow tested to over 600 whp!

This 2015 WRX front-mount intercooler is available with either a Sleek Silver or Stealth Black cooler and, like all of their 2015 WRX parts, includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

  • Fits the 2015+ Subaru WRX
  • 3.5" Thick intercooler design optimized for maximum flow
  • Designed to work with Mishimoto Performance Air Intake and stock intake
  • No modification to front bumper and retains stock fog lights
  • Includes black powder coated steel, tubular crash bar
  • Smooth cast end tanks allow the best possible airflow in and out of the intercooler
  • Optimal core design for maximum cooling efficiency with minimal pressure drop
  • Rated to 600 whp
  • Includes all necessary couplers, brackets, and accessories
  • Intercooler available in Sleek Silver, Stealth Black, and Gold
  • Mishimoto Lifetime Warranty

PURCHASE INCLUDES

(1) Bar-and-Plate Intercooler
(1) Intercooler Mounting Bracket
(1) Charge Pipe Assembly
(1) Air Splitter with Attached Rubber Gaskets
(1) Charge Pipe to Intercooler Hose
(1) Intercooler to Throttle Body Hose
(3) Bypass Valve Hoses
(2) 3" T-bolt Clamps
(2) 3.5" T-bolt Clamps
(4) Worm-Gear Clamps
Mounting Hardware
Mishimoto Lifetime Warranty

COOLER OVERALL SIZE

37.7" x 8.6" x 5.4"

COOLER CORE SIZE

28" x 8.05" x 3.5"

COOLER CONSTRUCTION

Bar-and-plate with cast end tanks

COOLER INLET / OUTLET

2.45" I.D. / 2.75" O.D.

Hot-Side Intercooler Pipe Specs
  • Made from Polished Mandrel-Bent Aluminum
  • 2.25" I.D.
  • Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo
  • Includes Two Lower Intercooler Pipes
COLD-SIDE INTERCOOLER PIPE SPECS
  • Made from Polished Mandrel-Bent Aluminum
  • 2.5" & 2.75" I.D. Pipes
  • Includes Upper and Lower Intercooler Pipes
PURCHASE INCLUDES

(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/Mounting Hardware
(2) Hot-Side Intercooler Pipes
(2) Cold-Side Intercooler Pipes
(1) Air Intake Bracket
(1) 2.25" 45° Coupler
(1) 2.25" to 2.75" 45° Transition Coupler
(1) 2.5" to 2.75" 55° Transition Coupler
(1) 2.5" to 2.75" 65° Transition Coupler
(1) 3.00" Straight Coupler
(1) BPV Recirculation Hose
(1) BPV Vacuum Hose
(1) 30-45mm Worm Gear Clamp
(2) 1.75" T-Bolt Clamps
(3) 2.5" T-Bolt Clamps
(2) 2.75" T-Bolt Clamps
(5) 3" T-Bolt Clamps
Mishimoto Lifetime Warranty

CRASH BAR SPECS

Steel Construction with Black Powder Coat
Application-Specific Mounting Holes

ENGINE CODES

FA20DIT

CHASSIS CODES

VA

Installation Torque Specs

27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

NOTE

Mishimoto recommends that this intercooler kit, not be used with the stock ECU programming. It is highly recommended that the customer be able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle. This kit is rated for approximately 600 whp during normal operating conditions. Maximum horsepower potential will be near 700 whp. Exceeding these horsepower or pressure limits could require a custom-size front-mount intercooler.


THIS FRONT-MOUNT INTERCOOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+ WRX OIL COOLER KIT

Installation Video


This Part Fits

  • 2015-2019 WRX Mishimoto Performance Front Mount Intercooler Kit (*CARB CERT)

Additional

Additional Information

Installation Instructions No
Additional Warranty Information No

1 customer reviews

Average rating
(based on 1 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. It all begins with realization

    By alex February 21, 2019

    This part is MASSIVE compared to the TMIC. Sure, the installation was a little difficult, but only if you are doing this by yourself. The removal of the TMIC and bumper were actually a little more difficult then installation. All I have to say is, take your time with the install, use WD40 to help make the silicone parts fit on easier and more snug, and route everything as CLOSE AS POSSIBLE to make the bumper installation as easy as possible. Also, be sure all the clamps are TIGHT AND SNUG, you would hate to have a boost leak after being excited to try it out. The turbo spool is definitely louder. Everything you need is supplied, and NO, IT WILL NOT SUPPORT A LICENSE PLATE, so have an adapter or get creative.

    Other then that, amazing part, good quality, and FYI the chrome color looks phenomenal with any color set-up you plan to have in the engine bay.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!