Lighting

OLM LED / Corona Ring DRL Fog Light Housings - 15+ WRX / STI / 13-16 BRZ / 14-18 Forester / 13-17 Crosstrek

 

As low as: $149.95

Price as configured: $149.95

The market is moving towards LED lighting. OLM produced an LED fog light casing with integrated corona ring DRL. The DRL is extremely bright and will remind you of the lights on current, high end vehicles.

Sold as a PAIR

NOTE: All BRZ and 13-17 Crosstrek with Non Steering Responsive Foglights require PSX24X to H11 converter harness.
1 x OLM LED / Corona Ring DRL Fog Light Housings (pair)    (In Stock)   +$0.00

* Required Fields

Price as configured: $149.95

Description

Details

FT86SF - OLM Corona Ring DRL Fog Lights

OLM LED / Corona Ring DRL Fog Light Housings


The market is moving towards LED lighting. OLM produced an LED fog light casing with integrated corona ring DRL. The DRL is extremely bright and will remind you of the lights on current, high end vehicles.

Simple 12v wiring allows you to plug and play the actual light and hook up the halo to any component you want to power it. Refer to the additional tab for sample power locations.

Sold as a PAIR


The market is moving towards LED lighting. OLM produced an LED fog light casing with integrated corona ring DRL. The DRL is extremely bright and will remind you of the lights on current, high end vehicles.

Simple 12v wiring allows you to plug and play the actual light and hook up the halo to any component you want to power it. Refer to the additional tab for sample power locations.

Sold as a PAIR

APPROXIMATE COLOR TEMPERATURE

  • 6000k

BENEFITS

  • Current draw does not exceed factory wiring limits
  • Improved visibility
  • Integrated DRL Halo
  • Plug and Play for vehicles equipped from the factory with fog lights (main light)
  • Easy to install

NOTE: All BRZ and 13-17 Crosstrek with Non Steering Responsive Foglights require PSX24X to H11 converter harness.

Instructions

Please see additional tab.

Optional Install Items

Most installation will ONLY use ONE of the items below and not BOTH.

Add a fuse

This add a fuse can be plugged into the high beam fuse located in the engine compartment. This will allow for easy wiring of the halos. They will function as a DRL whether or not your DRL resistor is plugged in or unplugged. They will turn off when your headlights are on.

DRL Harness

SubiSpeed's DRL harness was originally designed for base and premium 2015 WRXs. It comes with Vision+ boomerang / C light bulbs and will allow you to keep these lights on as a DRL. The additional wiring can also be spliced into to provide power for accessories like this halo fog. Lights will be on as a DRL AND when the headlights are on. Includes harness, 2 bulbs, and 4 sets of T-taps for wiring this accessory.

Warranty

1 year manufacturer's warranty

FAQ

We have some instructions in the additional tab on this page, however the pictures below will help as well:





Pictures are from a similar model light. In this model, the ground wire is not present here. Ground comes from the H11 plug.


This Part Fits

  • 2013-2017 Crosstrek OLM LED / Corona Ring DRL Fog Light Housings
  • 2015-2017 Subaru STI OLM LED / Corona Ring DRL Fog Light Housings
  • 2015-2017 Subaru WRX OLM LED / Corona Ring DRL Fog Light Housings
  • 2013-2016 Subaru BRZ OLM LED / Corona Ring DRL Fog Light Housings
  • 2014-2018 Subaru Forester OLM LED / Corona Ring DRL Fog Light Housings

Additional

Additional Information

Installation Instructions

UPDATE: Now the ground is supplied by the fog light harness. There is no additional ground wire. Please ignore references to it in the instructions below.

Turn wheels to gain access to fasteners holding wheel liner in.

Undo top fastener. If more room is needed, remove lower fasteners as well.

Unplug fog light bulb.

Use a Phillips head screw driver to remove OEM housing.

Remove fog / turn bezel.

Replace with OLM LED housings.

Reinstall and plug back in the fog lights.

Wiring

The H11 plugs supply power to the main lights. The additional ground should be connected to the chassis (black wire). However, the ground from the H11 plug also provides a ground to the halo.

The halo turns on when power is supplied to the red wire. The yellow wire turns off the halo when power is supplied to it. You do not have to use it if you want the halo to always be on.


2015 WRX / STI - In the pictures below, you can see the fuse box mounted in the engine compartment. The high beam fuse has power when functioning as a DRL and when the high beams are on. The low beam fuse is only provided power when the low beam is on.

NOTE: Optional install items shown.

We chose to use add a fuses to protect the main fuses.






2013 FR-S / BRZ - In the picture below you will see a great source for 12V ignition power underneath the hood. Anytime the vehicle is on, there will be power at this location.


Please note the plug orientation for the actual fog light portion:

NOTE: If you have our base fog light harness, please note the wires on it will look different. The ground / negative wire is black while the positive is blue. Failure to wire these together correctly may result in the fuse blowing. Replace the fuse and correct the orientation if this happens.

Additional Warranty Information None

3 customer reviews

Average rating
(based on 3 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Awesome Fog Light

    By Alvie May 11, 2018

    This pair of Fog lights look awesome on my 2013 XV Crosstrek. Installation was done preofessionally as the instructions provided by subispeed were extremely vague, therefore I recommend to bring it your car to a local shop to get it done correctly...I have them set to have the corona ring to turn on as DRL and the fog lights turn on when using the fog lights as usual...They are bright and make my car very unique.

  2. High quality but needs more for installation

    By William January 01, 2017

    Got my fogs in a few days ago, have access to a lift so was very simple and easy. Overall it's as discover but wanted people to know that, unless mine was a defect, the fog light portion requires the DRL portion to have a hot connection. So installing based on the instructions to tie into the HB fuse in the bay will work until you turn the headlights on, at which point the DRL circuit is shut off rendering the fogs off. So you will need to wire to an ignition only circuit if you want these to function as fog lights. FWIW I have a 15 STI with factory fogs and LED headlights.

  3. Awesome bright DRLs!

    By Joneil December 31, 2016

    These pair nicely with the Subispeed S4-style fog light bezels since they're about the same brightness level. In daytime these are very visible and look so sweet. Adjusting the beam was also very easy since you could just use your fingers instead of finagling with a screw driver. If you're thinking of getting rid of the high beams and replace them with these as your DRLs you won't regret it!

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!