Halogen lights produce high amounts of heat versus light when compared to an LED kit. They also have a lower life span with lower light output per watt. Prior to recent years technology was not advanced enough to use LEDs to replace headlight bulbs. The low output made it simply dangerous. OLM's "45S" are game changers and use 4 (2 per side) Philips Luxeon MZ chips to provide a brilliant output.
The base of the light is adjustable so you change the focal length resulting in the best output.
NOTE: For the high beam application, we only recommend using this bulb when you disconnect the DRL resistor or disable the DRL in some other manner. The light output of this bulb is too high to run during the day.
Warranty: 1 year
IP rating: IP67
Approximate Light Output: 4500 lumens
Approximate Wattage: 45 watts
Phillips Luxeon MZ
While the cost of the Phillips Luxeon MZ chip is generally higher compared to various chips on the market, the bulb outputs a very uniform light when it comes to color. It really does offer the best combination of brightness, uniformity, and luminance, enabling precision light control.
Tuned Light Output
Straight out of the box, the OLM 45S offer superior total light output and uniform color. With the adjustable base, you can rotate the light as required to change the focal length and aim of the LED chips. This ensures that the setup results in usable light which will help guide you through the hours of dusk and night.
This Part Fits
- 2015-2017 Subaru STI OLM Headlight High Beam "45S" LED Bulbs
- 2015-2017 Subaru WRX OLM Headlight High Beam "45S" LED Bulbs
LED kits are easy to install.
The stock wiring can support a 45w LED kit. No modification to the wiring is required.
Caution: Never touch bulbs with your bare hands. The oils from your hands can cause the bulb to break once they are turned on and heat up.
Disconnect the factory harness from the light bulb and remove the factory light bulb.
Install the LED bulb in the socket in the same manner as the stock bulb.
Be sure to take notice of the + and - markings on the LED driver. Connect the end to the factory harness. The black wire on the factory harness should align with the - sign on the ballast.
For the driver's side, repeat the same steps above. Once you are complete, test the lights.
|Additional Warranty Information
Be the first to review this product
Write Your Own Review
Only registered users can write reviews. Please, log in or register
Upload images for this product
Feel free to share pictures of your vehicle with this product!