Lighting

SALE
OLM 35w/55w Dual Power Headlight H11 HID Kit (various colors) - 2015+ WRX Base and Premium

OLM 35w/55w Dual Power Headlight H11 HID Kit (various colors) - 2015+ WRX Base and Premium

Be the first to review this product

$109.95

$144.95

SKU: olmdphid

In Stock Unless Noted Below  

Halogen lights produce a lot more heat vs light when compared to an HID kit. You can run a lower wattage HID kit and get more light output. In addition to this, you have the option to pick various light temperatures to improve your night time driving experience.
Reset Configuration

* Required Fields

$109.95

$144.95

Description

Details

OLM Dual Power HID Kit


This dual power kit takes HID kits to the next level. An additional trigger circuit allows your high beam to change the output from 35w to 55w. Not only were these ballasts designed to handle this, the bulbs are unique to this product as well.

In the high output mode, the difference is easy to see. This kit also works great for OLM high/low projector fog light housings. See below in the related items.

Comes with HID relay to support the extra current draw. Also comes with a 9005 high beam splitters so you can tap your existing high beam with ease.


Fits
  • Halogen lamp equipped FR-S (low beam)
  • Halogen lamp equipped 15+ WRX (low beam)
  • OLM Projector Fog Lights

It is NOT recommended to use this in ANY reflector housing.

Additional Information

The stock halogen projectors do a decent job of keeping the HID light focused exactly where you want it.

OLM bulbs are available in a variety of colors to suit your desired output. They have a lifespan much longer than halogen bulbs. You'll get around 2500 hours out of them.

Warranty: 1 year
Ballast Type: Flicker free
Ballast Details: IP65
Approximate Light Output: 3400 lumens in low mode

NOTE: Switching to 55w mode will make the output appear a step warmer than the original output. This is just what happens when the bulb is run at a higher wattage.

FAQ

With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.

Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.

Please check the polarity of all the connections, the HID relay connection to your battery terminal, and the fuse in the HID relay.

For this model you do, but it is included in this product listing. We highly recommend using it.

It is not recommended that you touch the glass portion of the bulb for any reason. Oils from your hands can cause the bulb to shatter once it heats up. Handle the bulb by its base only.


This Part Fits

  • 2015-2017 Subaru WRX OLM 35w/55w Dual Power Headlight H11 HID Kit (various colors)
  • 2018+ Subaru WRX OLM 35w/55w Dual Power Headlight H11 HID Kit (various colors)

Additional

Additional Information

Installation Instructions

HID kits are easy to install.

An HID relay is included to withstand the extra current draw from this kit.

Caution: Never touch bulbs with your bare hands. The oils from your hands can cause the bulb to break once they are turned on and heat up.

Open air box on passenger side to gain access to the bulb area. With the airbox split open, you can reach the light bulb. Disconnect the factory harness from the light bulb and remove the factory light bulb.

Install the HID bulb in the socket in the same manner as the stock bulb.

Be sure to take notice of the + and - markings on the HID ballast. Connect the end to the HID harness. The black wire on the factory harness should align with the - sign on the ballast.

For the driver's side, it is recommended that you loosen the battery tie down and move the battery a little to gain access to this bulb. Repeat the same steps above. Once you are complete, test the lights. If they work properly, tighten everything back down and reassemble the airbox.

Connect the positive wire from the HID relay to the battery terminal. The ground signal comes from your original H11 connector which will be connected to the relay to turn it on.

Additional Warranty Information No

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!