It is not recommended that you touch the glass portion of the bulb for any reason. Oils from your hands can cause the bulb to shatter once it heats up. Handle the bulb by its base only.
A complete HID retrofit is how you get the sharpest cutoff around. These components rival and actually outperform many OEM setups. While they do require removal of the headlight assembly and lens, the payoff is high!
Morimoto is a well known for their lighting products. All of their items are backed by a warranty.
A dream come true. With the performance from the big boys like the FX-R combined with the ease of install from the Mini H1; the Morimoto Mini D2S Stage III System makes real headlight performance more accessible to all.
Based on the amazingly easy to install Morimoto Mini D2S 3.0 projectors that feature an easy-install style threaded mounting shaft which installs with little to no mods and of course - fantastic light output.
The Morimoto XB Ballasts feature: Relocated igniters like OEM ballasts putting them far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up.
The 'Moto 3Five bulbs feature: metal framed bases for precise alignment giving you a clean beam pattern. Quartz glass tubes to minimize UV output and maximizing luminosity. Their Prax-Air (USA) metal halide salts produce very accurate color temperatures (3K/43K/5K/6K).
The HD relay is a weather pack relay with revised circuitry, heavy-duty 14ga stranded copper wire, injection molded inline fuse holders, and full plug-n-play functionality.
Includes 9005 splitters in order to give you the option for having a total of 4 high beams (two retrofitted lights + stock high beams).
There has never been a better time to do a retrofit. As with all complete kits from TRS, you get freebies like an extended warranty, discounted pricing, and personalized customer service from our knowledgeable team.
KELVIN AND LUMENS (35W)
4K Range:Warm White (~3100 lm)
5K Range:Pure White (3000 lm)
6K Range:Cool White (2900 lm)
Input: DC 9-32V
Output: AC 85V 35/50W
Max Voltage: 25KV (at start-up)
Rated Lifetime: 2500 hours (XB35) for bulbs
Projectors: Morimoto Mini D2S 3.0 Bi-xenon
Ballasts: Morimoto XB35 (35W)
Igniters: Morimoto XB AMP
Bulbs: Morimoto D2S (upgraded XB35 "H11B")
Harness: Morimoto HD Relay
Hardware: 8 Position Ballast Mounting Brackets
Splitters: 9005 high beam splitters
Warranty: 5 Years for XB35
RetroRubber Housing Sealant - Optional
Consider having some butyl rubber around when you need to reseal your headlights to prevent moisture from getting in. Note that in this application, many will be able to separate their lens from the housing without additional heat (baking / heat gun). It can be done at room temperature.
Optional - SubiSpeed Sidemarkers
These sidemarkers are a direct fit replacement for the factory orange sidemarkers that come with 2015+ WRX and STIs. This is a great modification to perform when you're working on your headlights. Common customization modifications are blackening them out (WRX non-limited), adding Morimoto or Diode Dynamics C-lights, and retrofitting Morimoto projectors (WRX non-limited).
Please see "Related Products" link below for these.
This Part Fits
- 2015-2017 Subaru WRX Morimoto Mini D2S 3.0 O Lens HID Retrofit Kit
|Installation Instructions||This kit contains the components required to retrofit HID projectors into your vehicle. Professional installation and knowledge of 12V wiring is recommended. The headlights must be taken out of the vehicle and the lens must be separated. For this vehicle, most can separate the lens from the housing at room temperature. This is the only way to replace the existing projector. Some drilling is required for mounting as well.|
|Additional Warranty Information||No|
Be the first to review this product
Upload images for this product
Feel free to share pictures of your vehicle with this product!