Many Subaru vehicles come with plastic fog light hosuings. They often utilize 19 watt bulbs. Many reviewers will note that they don't put a whole lot of light on the road.
You can change all of that with our glass replacement housings. We've tested these on our vehicle and they are compatible with HID kits as well, however it is highly recommended to use a projector housing for HID lights.
Stock, they come with 55 watt bulbs which are fully compatible with the stock wiring and will put a lot more light on the road.
Optional accessories include Lamin X tint kits. With Lamin X kits, you add protection can get them in yellow to improve fog / foul weather visibility or smoked (for looks).
This is a plug and play kit as the harness will fit the new bulb directly without modification.
Installation is simple! Just turn your wheels, undo some fasteners, and the factory housings can be swapped without lifting the vehicle or removing the bumper.
- Comes with 55w halogen stock
- Higher light output (55w vs 19w)
- Improved visibility
- Plug and Play
- Easy to install
- SAE/DOT Approved for street use
- Made of High Quality OEM Grade ABS Plastic
NOTE: Some vehicles which require a PSX24W to H11. If you have a BRZ or Crosstrek you will need them (unless you have steering responsive fog lights), so please add that option to your cart.
This Part Fits
- 2013-2016 Subaru BRZ Fog Light Upgrade Kit with Glass Housings
|Installation Instructions||Turn wheels to gain access to fasteners holding wheel liner in.
Undo top fastener. If more room is needed, remove lower fasteners as well.
Unplug fog light bulb.
Use a Phillips head screw driver to remove OEM housing.
Replace with OLM glass housings.
Reinstall and plug back in the fog lights.
If more room is needed on the driver's side to remove housing, unplug the windshield reservoir pump. Remember to plug it in again after installation is complete.
|Additional Warranty Information||None|
1 customer reviews
Bought these for my '13 Crosstrek. The spacing of the holes don't seem to be quite the same as stock. I had a lot of trouble keeping the bolt from cross threading. Take your time and be careful. Once I got them started everything was OK. Once installed they look great. I installed OLM Moab LED bulbs in them and they look great.
Upload images for this product
Feel free to share pictures of your vehicle with this product!