OLM S207 Rear Bumper Vent
Since the S207 never made it over to US shores, here is your chance to give your vehicle the S207 treatment. These inserts can easily be painted and installed. Includes a template for mounting. The overhang conceals any rough edges left during cutting.
Tape the included template to your rear bumper. Cut out the inner outline. This is the area you will cut along. The outer line represents how much the duct will cover up. It overlaps the cut area to provide a clean edge. The inner cut does not have to be perfect as the vent will hide much of this area. Outline this cut area with a marker. Remove the template and cut the hole. Place the template back on, but cut the paper back to the outside line. This will allow you align and install the vent. Use panel bonder or 3M to attach the vent to your bumper. Repeat on the other side.
NOTE 1: There is a brace behind the bumper so you may choose to take the bumper off or pull the side away from the vehicle slightly if you plan to cut on vehicle.
This Part Fits
- 2015-2019 STI OLM S207 Style Paint Matched Rear Bumper Vent Inserts
- 2015-2019 WRX OLM S207 Style Paint Matched Rear Bumper Vent Inserts
|Additional Warranty Information||None|
1 customer reviews
S207 Bumper Vents
All and all very pleased with the purchased. Install is not overly hard, you just have to get over the fact that you have to cut your bumper.
Down falls to this item are; only comes with one template, the provided double sided tape is hit or miss ( I recommend having some around just in case).
Upload images for this product
Feel free to share pictures of your vehicle with this product!