Camber / Caster / Toe
Lower Control Arm Install
Torque Solution Rear Upper Inner Control Arm Bushing Kit - 2015+ WRX / STI / 2013+ BRZ / 13-18 Forester$89.99Torque Solution polyurethane control arm bushings replace the soft OEM inner rubber material that over time deteriorates and fails. These will provide improved traction and reduced wheel hop without too much vibration, as they are made from 75a durometer polyurethane and utilize stainless steel pins.
$645.00Rear Lower control Arms are an ideal suspension modification after lowering any WRX/STI or FR-S/BRZ/86. The LCA will allow for proper rear camber adjustment and aid in maximizing handling and braking abilities while saving tires from uneven tread wear. In addition the arms will also keep the camber true during hard/competition drifting or racing by eliminating soft rubber bushings. STANCE V2.0 LCA was designed to raise the hub which lowers the car by 60mm, which increases bump stroke maximize bump and rebound stroke.
$575.00Stance Adjustable Lower Control Arms are made from billet aluminum for strength and durability. The Lower Control arms are used to adjust camber and the range achieved with these is negative 1deg - 6deg. Stance also implements Aurora Rod ends on these arms. The most important part of aftermarket suspension links are the rod ends. Aurora spherical rod ends are one of the most expensive and high quality rod ends on the market, and for good reason. Aurora ends are used in both military and NASA Applications, so their quality pretty much speaks for itself.
$29.65Late and European model GT86 / BRZ come with auto headlight level sensors on their rear LCA. When Verus redesigned the lightest LCAs available, Verus removed this feature at the time but with late model and European owners asking Verus for a solution, Verus has designed this simple and effective solution.
$467.00This Pillow Ball Upper Mount is made especially for gravel competition such as Rally or Dirt Trials. It's designed exclusively with huge input or input angle on gravel in mind. It uses a highly strengthened outer collar and No.18 Pillow Ball (MBWT18) giving it high strength and durability while running a low cost. Also, the pillow size can be changed by swapping out to a MBWT22 pillow.
$360.00Cusco Pillowball Upper Mounts give you control over unwanted forces under acceleration and braking. Both center lock and camber adjustable upper pillow ball mounts improve steering response and performance.
$365.00The Ultimate Camber Plate for the WRX and STi features an almost infinite range of camber and caster adjustment within the OEM strut mounting point. You are able to achieve up to -4+ degrees of camber and -9.5+ degrees of front caster on the OEM suspension with more available on a suitable coilover. These plates are available for WRX and STi and fit the stock struts as well as a wide range of aftermarket coilover options including KW, RCE, and Bilstein struts. NOTE: On stock setups, these plates can raise the front by approximately 1/2".
$175.00These Toe-Control arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe.
$609.95This genuine STI Japan set comes with revised lower control arms and toe arms for your 2015+ WRX / STI.
$550.00Blackworks Racing Billet lower control arms for the WRX/BRZ/FRS are designed and manufactured in the USA. Precision CNC machined from High Quality billet aluminum.