SubiSpeed

SubiSpeed Facelift JDM Style DRL Bezel - 18+ WRX / STI

Be the first to review this product

 

As low as: $179.95

Price as configured: $179.95

JDM styling is now available in the US without the high price tag. These are finished in a high gloss metallic black paint.

NOTE: Bundle does NOT include fog lights.
1 x 18+ WRX / STI SubiSpeed Facelift JDM Style DRL Bezel   (In Stock)   +$0.00

* Required Fields

Price as configured: $179.95

Description

Details

Subispeed's How To Install Video

SubiSpeed Facelift JDM Style DRL Bezel

Subaru didn't bring these awesome fog light bezels to the states. They can be imported but at a cost. A similar look can be replicated using these SubiSpeed bezels however. They feature metallic gloss black bezels and an ultra bright DRL strip.

NOTE: This model does not include a turn signal and was designed for vehicles with turn signals in their headlights either from factory or through a modification (ie Morimoto or Diode Dynamics C-lights).


Wiring

  • Red - Positive
  • White - DRL Override (positive, connect to power wire IF you want it to turn off under certain conditions)
  • Black - Negative / Ground

You can wire these up a few different ways. If you own a 15-17 WRX / STI with bumper conversion or 18+ WRX Premium / Base owner, we recommend the SubiSpeed Quick Connect wire that goes in your low beam and high beam fuse spots. 18+ WRX Limited and STI owners we recommend modifying an add a fuse plug. More details on the "additional" tab.

NOTE: While most of the connectors are sealed, DO NOT allow connectors or the driver boxes to rest in areas where water pools up (ie the plastic tray at the bottom of the car). Encouraging them to be submerged in water for periods of time is not recommended for long life. Mount them in an area that will minimize exposure to water and vibration.

Featured In Subispeed's New Products September Video


This Part Fits

  • 2018+ Subaru STI SubiSpeed Facelift JDM Style DRL Bezel
  • 2018+ Subaru WRX SubiSpeed Facelift JDM Style DRL Bezel

Additional

Additional Information

Installation Instructions

Wiring Notes

All vehicles can use this solution. The lights will come on when you start your vehicle using this power source. The need for this method comes from the 18+ WRX Limited and 18+ STI models which have their stock DRLs integrated into the LED headlamps.

It requires the use of an add a fuse.

Step 1

You will want to remove the lower fuse if you have one installed in your add a fuse. The top slot will require a low amperage fuse (below 5 amps). You will want to remove the prong that is circled in the photo below also.

Step 2

Locate the position of the DRL fuse.

Step 3

Insert the modified add a fuse just like the picture below. This connection will provide a positive power point for your DRL bezels.

Additional Warranty Information None

Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!