14-18 Forester

OLM LED Reverse Lights - 2015+ WRX / 2015+ STI / 2013+ BRZ / 2013+ Crosstrek / 2014+ Forester

 

From: $22.96

To: $40.00

Price as configured: $0.00

The factory reverse light is a standard halogen bulb which emits a very orange, dim light. OLM has options which will increase your visibility and upgrade the bulb to a much newer technology. There are different bulbs available depending on your needs and desires.

* Required Fields

Price as configured: $0.00

Description

Details

The factory reverse light is a standard halogen bulb which emits a very orange, dim light. OLM has options which will increase your visibility and upgrade the bulb to a much newer technology. There are different bulbs available depending on your needs and desires.

All replacements are long life, low current draw, white, and LED.

These bulbs are sold as a PAIR.

Models

Total output my vary depending on assembly and configuration. Values are listed to help you choose the correct bulb for your application.


Vision Circuit

The raw look of the OLM Circuit line just means this bulb means business. It has some serious output that currently cannot be matched by any bulb on this site. It wears its circuitry on the outside and you see the large heatsink sandwiched in between the printed circuit board.

  • Each chip: ~53.3 Lumens
  • Total output (15 chips): ~800 Lumens

Choose this bulb if you want the most highest output possible from a bulb with a compact design.


Vision

This bulb has a more traditional plastic base which also integrates the use of aluminum for heat dissipation. These tiny chips combine to provide crisp, brilliant light.

  • Total output: ~320 Lumens

With the looks of a traditional LED bulb, this will provide reliable, bright light for a regular daily driver. The base fits just like an OEM bulb would.

FAQ

With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.

Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.

When you seat the bulb, use a good amount of force to firmly seat it in the socket (~5 lbs). Do not strike the bulb on the housing when inserting it. This is usually the cause for loose bulbs.

*claims based on other bulbs which can fit this position which do not have ballasts or LED drivers.


This Part Fits

  • 2013-2017 Crosstrek OLM LED Reverse Lights
  • 2015-2019 STI OLM LED Reverse Lights
  • 2015-2019 WRX OLM LED Reverse Lights
  • 2013+ Subaru BRZ OLM LED Reverse Lights
  • 2017-2019 Subaru BRZ OLM LED Reverse Lights
  • 2014-2018 Subaru Forester OLM LED Reverse Lights

Additional

Additional Information

Installation Instructions

Remove the automotive fastener in the trunk by prying the black part away from the white portion. It should pop off easily.

Only the one above the tail light needs to be undone to gain access to the tail light. Pull the carpet back to gain access to the bulb. Replace with OLM LED bulb.

Seat the bulb FIRMLY in the base to prevent it from coming out unintentionally.

Reinstall the carpet and repeat for the other side.

Sold as a PAIR

Additional Warranty Information None

23 customer reviews

Average rating
(based on 23 reviews)
Ease of Installation
Fit / Quality
Overall Satisfaction
  1. Great addition

    By Tyron October 19, 2018

    I’m sooo happy about this...... i definitely recommend this to anyone and it was an easy install.

  2. Great product

    By scott May 30, 2018

    Super bright! fit on installation is tricky!

  3. Vision Circuit

    By Phillip December 20, 2017

    Awesome light, super bright, and very simple. Careful when installing though due to it not seating great.

  4. SUPER BRIGHT!!!

    By Abraham October 22, 2017

    These LED's are incredibly bright and I love them! I can see everything in my rear view camera at night and people definitely see me when I'm backing out. Glad that I upgraded to these because they are amazing! Must have product in all honesty. It only takes like 10-15 minutes to remove the liner and install these, worth it all the way!!

  5. Bright reverse lights

    By John May 30, 2017

    This product is really easy to fit just be very aware that the bulbs tend to drop out of the holders at random times so don't be surprised in having to remove tail lights to fish out the bulbs and replace into the sockets. Have done this twice over the timed I have owned them. I did originally place them really firmly into the sockets ad it lasted three weeks then the second time I slightly bent the contacts in the holder and will see if this helps

  6. BRIGHT

    By JD January 19, 2016

    An easy (and inexpensive) upgrade over the stock reverse lights.
    The first Vision+ lights sent had a short and caused the rearview camera to come on and the LED's would stay lit. Subispeed was fast to replace them. I received my replacement set within two days.

  7. great and bright

    By Shawn September 17, 2015

    bought the vision circuit, installed within mins. the lights are very bright and can definitely tell a major difference when using the backup camera. Recommend when installing since there isn't much feedback into the connector just be safe and press firmly, and shouldn't have any problems. mine have been installed over 2 months and zero problems. AWESOME

  8. Taking out liner sucks but lights look fantastic!

    By Tracie June 13, 2015

    This took me about 45 minutes to finish. I was being careful with removing the trunk liner and all the clips. I didn't want to break anything. This was by far the most difficult part of getting these into the car.

    These don't click in, just firmly press them into the light socket. I went and put my car into reverse before putting them into the taillight to make sure I had them in right and they worked.

    If they don't slip right into the tail light assembly, stop and make sure the light is still seated. If you lose it into the tail light, it'll ruin your day. Take this part nice and slow, and you'll be fine.

    When you are done, these things look like flashlights on the rear of your car. I don't know why these aren't factory tbh. Well worth your time and money.

    I bought the Vision Circuits.

  9. GREAT!

    By Thomas May 14, 2015

    Installed in minutes. Super bright. I bought the vision circuit. Extremely brilliant white light.

  10. BRIGHT

    By Kyle May 11, 2015

    Recently installed the vision circuit... holy blinding backup light!

    This makes parking in my work/home parking garage easier in the rear view camera.

    Love the look!

  11. looks great!

    By Ryan April 19, 2015

    one of the bulbs was a bit loose and as Qian said it fell into the tail light housing and took a bit of work to get out, but when you get them in they look great!

  12. Bright, High Quality!

    By CHRISTIAN March 13, 2015

    These are great, especially because I have a super dark limo tint so I can't see anything when going in reverse at night. But with these, it just lights the way. Plus, they don't have that tinge of blue, just pure super white. Great product!

  13. Must have

    By mike March 11, 2015

    100% improvement from stock.

  14. HELLA BRIGHT! WILL RECOMMEND USING THIS UPGRADE!

    By JOHN February 23, 2015

    REPLACE YOUR DULL HALOGEN BULBS WITH THESE BAD BOYS! PAIRED IT IT WITH FULL REPLACEMENT LICENCE PLATE LIGHT LED! HELLA BRIGHT WHEN BACKING UP!

    (Vision Circuit)

  15. 2014 Non-turbo Impreza Sport Premium Hatchback

    By Andrew January 12, 2015

    If I was to sum it up in one word it would be

    BLINDING

  16. Good

    By Qian November 29, 2014

    They are bright, only one complain about the bulbs is that they are loose compare to the OEM bulbs, when I install them I pushed a little bit too hard and dropped the bulb inside of the light, it was a little pain to get them out...other than that they are good

    (Vision Circuit)

  17. O . M . G . !

    By Bart November 03, 2014

    These are a must have if you ever need to do anything behind the car at night (like hook up a dirt bike trailer or mount your mountain bikes on a bike carrier).

    Simply turn ignition to on, put in reverse, and you have rear-mounted spot lights! They are so BRIGHT compared to stock, I love it!

  18. Wow these are bright!

    By Joey September 06, 2014

    Installed on a 2015 WRX Limited. Even after reading all the reviews here before ordering I was still stunned by how bright these were. Massive improvement over stock and provide a nice usable white color without the blueish hue you get from a lot of other "white" LEDs. Highly recommended.

    This certainly isn't a fault of the bulb, rather the socket design but there's no indication of when the bulb is fully seated. I was afraid of pushing it in too hard or not enough but so far they seem to be staying put.

  19. Bright!!

    By Frank September 04, 2014

    People will see you backing out from a mile away. Simple install but the only complaint i had, as mentioned before was that the bulb fell out easily. Make sure you put it in with some force or it will fall into the housing and you will spend time fishing it out. Overall good product.

  20. Clean Look.

    By ZomgSquiggy August 19, 2014

    Overall the install was simple, the end result is amazing. The LED itself looks very durable, and the light will let anyone know you are backing up.

    I only wish Subaru would make thinks give a click or pop when installed right.. while installing the light fell out of the socket, I put it back in, but with nothing to ensure its seated right, outside of it working. Not sure if it won't vibrate loose over time. I did go for a spirited drive after the install to see if I could get it knocked loose and so far so good.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Customer Product Images



Upload images for this product


Feel free to share pictures of your vehicle with this product!